buckstop515

Refund, I have been buying x plan for years and the x plan price has always reduced the sale price at time of sale. Even on orders.

My 22 250 is the same way. I keep meaning to push it in but forget about doing it.

Your dealer can check to see if you or family member have one. There may be one your not aware of.

I used hybred solutions ceramic coat within days of getting my truck. The finish is as good as Ive ever seen. There is also a hybred solutions ceramic detailer. Both are easy to use. I applied a 2nd coat after 6 months but it didnt really need it. The finish feels as soft as a mink coat.

I have the b&w turn over hitch and the b&w companion non slider 5th wheel. These are installed on my 22 f250. My truck is the 6.75 box and Im pulling a 22 jayco eagle ht trailer. I have experienced no issues backing into tight camping spots. I see no reason for a slider at least in my case.

Marathon seat covers. These are the best fitting covers I have seen. Very tight no wrinkles. Easy install. They will send color swatches to match your interior. Carhart isnt even close in quality. 2022 f250 xlt

I had a similar issue after I plugged into the bed mounted plug. What I found was a loose connection on the wiring harness where the y was plugged into the truck harness causing intermittent weak connection. I never lost complete connection but an extended brake application threw a right rear trailer brake light fault. I took all the connections apart applied connection grease and my problems disappeared. The loose connection was directly behind the spare. I had to lower the spare.

I have the factory back mat which covers up to the storage.throw a carpet runner of the correct size over the rubber mat. I have a couple of dog beds thrown in also. I made a bag out of boat top material to cover the seat back over the top of my seat covers. I also put side covers on the back doors to protect the window ledge. All of this can be removed when you arent hauling the pups taking the stink out of the truck.

I have a 22 f250 crew 7.3 w/4.30 gear. Driving around unloaded I vary 11 to 15mpg. Pulling the 5th wheel 8.5mpg. Before I loaded the trailer I was getting 10mpg. I live in the ozarks so my driving is hills and curves not conducive to good mileage.

Mine was built 11/20 2021. I just talked to my dealer today, no recall as of yet.

I have one of those. No I didnt use the chair as a step. Just a cheap walmart thing. The platform is nice but I still have to use a ladder to reach the roof and Im 6'.

Mine was built Nov. 20, 2021 and mine does not have a recall. My software was just updated through ford pass though.

Do yourself a favor and just remove the grill and passenger headlight. In the long run it saves time. The lower bolt on the headlight is a 13mm. Also run your wiring in front of the radiator and into the sideby your air box. The instructions are pretty poor.

I just installed the Raptor Style grill lights from custom auto works on my 22 xlt 250 Pretty straight forward install. I did remove my grill and passenger side head light to make the install easier. I plugged in the wiring harness to the parking light which besides running with heads on also lights up the front when leaving the vehicle until it times out. Great product at a reasonable price.

I installed the curt front reciever. The job took about 45 min. Working alone. No drilling it bolts right up. I do have the tremor valance and prius catchers are removed