Gharri30

Good looking rig. Hoping to see mine in the next week, some similarities to yours. Not to derail but have the fender extensions along with many other things waiting. Curious how the install went with them.

Updated, it’s all tweaked. Ceramic coated, lifted, and new shoes. 

My other car is a DeLorean. 

Ordered 11/20 and picked up 6/4.  6.7, Lariat ultimate, 5th wheel prep, wheel liners, HCTP/PTBA, rapid heat, adaptive cruise, rain sensing wipers, LEDs, Lariat Sport, FX4, 3.55 Electronic Locker.  Swapped out the front air dam for a 2wd one last night, also installed the inner fender extensions and removed the FX4 decals.  Getting tint and Line X this week.    

Finally got her waxed and some photos - 2022 F-450 KRU
 

 

 

 

 

 

 

 

 
 
 
 

The beast finally arrived today. Got the call this morning. Incredible truck. 
ordered 09/04/2021
built 05/03/2021
delivered today!

I plan on mounting a compressor and tank to the frame to run a horn off of. Then I'll just run another line and mount an air fitting somewhere on the truck. Probably in the bed, bumper or next to gas cap where def nozzel would be. 

Just had my SpeedLiner color match bed liner done this morning. Been using SpeedLiner for over 20 years and IMHO they are miles above the rest.
 
Carbonized Gray match 2022 Tremor 

I need you to send one of those to Alabama, pick mine up and bring it back to Charlotte as well. 😅😅

The link at the bottom of the email hasn't worked for me for a while. I just copy the vin now, go to the tracking page, input it and it pulls right up. 

Alright, so I may have a few answers. One of my coworkers F350 XLT showed up and he got the front and rear wheel well liners. I took a peak at the fronts. To answer the question about weather or not you install over the felt type liner that comes installed, they were installed over top of the felt ones (1st pic). The plastic liners are partly anchored by 2 clips that are fitted over the felt and plastic liner (pic 2). Now they definitely did some trimming to get them to fit, seen in pics 3 and 4. So it looks like those we referenced above may be the same and have to be trimmed to fit, or I'm assuming so since these were factory installed. 

Oh yea, thats a good feeling to finally see them show up. Suppose to be here beginning to mid June. Left Kentucky headed for Georgia and arrived either yesterday or today. Should be in SC tomorrow and I guess going to take 2-3 weeks to get to Charlotte from there. Should be in time for vacation so I can't complain. 

Thanks for the info. My modules populated yesterday and I can't stop looking at them. Congratulations on your rig shipping. Hopefully you see it soon. 👍

Got my shipped email and now just biting my nails until it arrives!!  Camping trip planned for June 11…was so close to getting it here in time but have to rent a truck instead.   Paramount Ford in Valdese, NC

Mine has been built and shipped and only ever showed bce modules. I should have responded to you in my above post since it was dealing with the as-built modules but I saw it to late. 
 

As built modules are like code parameters for functions in the truck. If you see others talking about changing things using forscan(disabling double honk, bambi mode, tire size, etc) these are the codes that are being changed. If you go to https://www.motorcraftservice.com/Home/SetCountry?returnUrl=%2FAsBuilt and type in you vin it will take you to a new screen. It will usually show like a G under the BCE modules. Eventually it there will be lines and lines of code that populate under it. That's usually an indication that you're pretty close to finished. My codes showed up Friday afternoon and received by built email Sat evening. I'm pretty new to it all but that's how I understood it all. Someone can chime in if I misspoke on something. 

Hello !
 
       I am not 100% sure but it looks like the front 1 shown in pic should of been pushed behind the trucks fender just like the cloth 1 is. It was easier too trim it then play around with it & get it in flush with the cloth 1. just what I see by looking @ the pic`s. Fairway is great to work with I have used them plenty with my 2014.
 
  Have a Good 1 !

Sales saying chip hold is the cause of the extended eta. Not sure why Ford would say built and send the built email if it’s not built but….
 
Hopefully the missing chip(s) come in and eta is much improved. 

@FirstFord22 I got the built email Saturday, shipped one this morning. Estimated delivery date of June 7-13. So we'll see what happens. Give me about two weeks to get it squared away before vacation if so. In the mean time I guess I'll see what else I can buy. 

Anyone with the 7.3 running exhaust yet? Saw Borla finally dropped one for the 22 7.3s, plus a few others. Have a Banks Monster exhaust on my current truck and want to find something with a similar sound. A good deep tone. I'll see if I can grab somewhat of a sound clip, hard to get a feel for it from the cab.
 
Edit....
Best I can get for now.. In cab with the windows up. Maybe I can talk my wife into a drive by later. 😅
Snapchat-1510086760.mp4

Just coil spacers on the front and Fox 2.0 shocks on the corners and dual steering stabilizers. 

Well after 11 months to the day my F350 Tremor finally arrived. Ordered 6/7/21 and she was delivered 5/07/22. I held out for all my options, adaptive steering, BAP, spray in bed liner, 5th wheel prep and retractable bed cover. It was worth the wait, now for window tinting. 

Rear of the truck was a little boring so I added chrome lettering. Gonna wax them in and see how they hold up. Not bad for $11.
 

Yeah my modules populated a while back not sure of the date 

Alright, so I may have a few answers. One of my coworkers F350 XLT showed up and he got the front and rear wheel well liners. I took a peak at the fronts. To answer the question about weather or not you install over the felt type liner that comes installed, they were installed over top of the felt ones (1st pic). The plastic liners are partly anchored by 2 clips that are fitted over the felt and plastic liner (pic 2). Now they definitely did some trimming to get them to fit, seen in pics 3 and 4. So it looks like those we referenced above may be the same and have to be trimmed to fit, or I'm assuming so since these were factory installed.