TexasAggie02 Posted February 18, 2019 Share Posted February 18, 2019 I searched over and over to see if anyone had info on installing a dash cam on the 18-19 Navigator and couldn’t find anything except some taps for radar detectors to the rear view mirror. It’s really about the same as the 15-19 F-150 (I have a ‘18 F-150 that I did last year). However, I couldn’t figure out how to remove the A Pillar trim piece on these vs the F-150 it’s easy. I took a video and thought I’d share in case anyone does something similar and it can save a few steps. Garmin Dash Cam Install Happy to answer any questions and apologies for my bad video techniques. Quote Link to comment Share on other sites More sharing options...
HofstraJet Posted February 18, 2019 Share Posted February 18, 2019 (edited) I slid the wires in between the A pillar and window. Lots of room there and then snaked to fuse box. Edited February 18, 2019 by HofstraJet Quote Link to comment Share on other sites More sharing options...
TexasAggie02 Posted February 18, 2019 Author Share Posted February 18, 2019 4 minutes ago, HofstraJet said: I slid the wires in between the A pillar and window. Lots of room there and then snaked to fuse box. Yep that’s what I ended up doing as well. Used a snake to get it behind the curtain air bag to the headliner. Then down the A Pilar with the molding removed. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.