blazerdude20 Posted February 20, 2019 Share Posted February 20, 2019 https://www.autoblog.com/2019/02/20/2020-ford-escape-engines-hybrids/ Quote The same paperwork shows 2020 Escape trims and engines with a little variation on the Lincoln sibling. The base Escape S will get Ford's 1.3-liter Dragon three-cylinder, with a horsepower yet to be declared. It will replace the 1.5-liter EcoBoost cylinder that makes 179 hp and 177 pound-feet of torque in the current Escape S. Quote Link to comment Share on other sites More sharing options...
RadicalX Posted February 20, 2019 Share Posted February 20, 2019 The Dragon engines are excellent in power density. They are light engines, modern and low vibration. I suspected the Dragons would be enlarged in the portfolio, but imagined the Dragon 1.5, not the 1.3. Quote Link to comment Share on other sites More sharing options...
bzcat Posted February 21, 2019 Share Posted February 21, 2019 It's 1.5 I3 not 1.3 And the topic is already being discussed in another thread. 2 1 Quote Link to comment Share on other sites More sharing options...
jpd80 Posted February 21, 2019 Share Posted February 21, 2019 1 hour ago, bzcat said: It's 1.5 I3 not 1.3 Thanks for the clarification bzcat, 1.5 I-3 EB Dragon is the logical successor to the older 1.5 I-4 EB. The 1.3 Dragon seems to be confined to much smaller vehicles in other parts of the world. Quote Link to comment Share on other sites More sharing options...
Sevensecondsuv Posted February 22, 2019 Share Posted February 22, 2019 I'm interested to ride in one of these. Four bangers always have single plane crankshafts which give them a characteristic vibration that's not present in multi-plane crank engines. A three cylinder ain't no straight straight six, but I wonder if it's not at least smoother than a 4 cylinder since the crank throws are 120 deg apart. It's apples to oranges, but I've got two old Ford three cylinder tractors (one gas and one diesel) that are quite smooth. 2 Quote Link to comment Share on other sites More sharing options...
jpd80 Posted February 22, 2019 Share Posted February 22, 2019 1 hour ago, Sevensecondsuv said: I'm interested to ride in one of these. Four bangers always have single plane crankshafts which give them a characteristic vibration that's not present in multi-plane crank engines. A three cylinder ain't no straight straight six, but I wonder if it's not at least smoother than a 4 cylinder since the crank throws are 120 deg apart. It's apples to oranges, but I've got two old Ford three cylinder tractors (one gas and one diesel) that are quite smooth. It's kinda cool, you can hear some note in the video Quote Link to comment Share on other sites More sharing options...
twintornados Posted February 23, 2019 Share Posted February 23, 2019 Sounds like the L Dragon will be a little powerhouse...older article before Ford cancelled Focus to NA market, but the engine description sounds like it will make it to the new Escape... https://www.autoevolution.com/news/fords-15-l-dragon-engine-to-replace-15-ecoboost-four-cylinder-in-the-us-125100.html Quote In addition to the Fiesta ST, Ford of Europe offers the 1.5-liter EcoBoost derived from the 1.0-liter EcoBoost in the all-new Focus. Two states of tune have been announced, packing 150 and 182 PS (148 and 180 horsepower). In the Focus, the L Dragon can be matched with the standard stick shift and optional eight-speed auto. Quote Link to comment Share on other sites More sharing options...
SoonerLS Posted February 23, 2019 Share Posted February 23, 2019 19 hours ago, Sevensecondsuv said: I've got two old Ford three cylinder tractors (one gas and one diesel) that are quite smooth. It has been too long since my dad swapped out the gasser for a diesel in his 4000, so I don't recall how it ran relative to the oil burner, and it's not often that I just get to sit there with the tractor running where I can pay attention to it, but I think you're right about it being relatively smooth. Then again, I'm kind of partial to the 4-banger sound, having grown up with an 8N. I do think the 3-bangers I use are smoother than the 4-pots, but once you're moving, you can't really pick out engine NVH from tire NVH and gopher mound NVH... 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.