Stng1996 Posted September 26, 2019 Share Posted September 26, 2019 https://media.ford.com/content/fordmedia/fna/us/en/news/2019/09/26/2020-ford-super-duty-pickup.html Quote Link to comment Share on other sites More sharing options...
akirby Posted September 26, 2019 Share Posted September 26, 2019 Quote Next-Level 2020 Ford Super Duty Pickup Owns Towing, Owns Payload, Owns Power and Owns Work I wish they'd stop beating around the bush and being so subtle......... 4 Quote Link to comment Share on other sites More sharing options...
HotRunrGuy Posted September 26, 2019 Share Posted September 26, 2019 40 minutes ago, Stng1996 said: https://media.ford.com/content/fordmedia/fna/us/en/news/2019/09/26/2020-ford-super-duty-pickup.html Interesting that in the Tech Specs, they do not show towing capacities for the Super Cab/Crew Cab 5th wheel/Gooseneck combinations, only for the Regular cab. HRG Quote Link to comment Share on other sites More sharing options...
akirby Posted September 26, 2019 Share Posted September 26, 2019 14 minutes ago, HotRunrGuy said: Interesting that in the Tech Specs, they do not show towing capacities for the Super Cab/Crew Cab 5th wheel/Gooseneck combinations, only for the Regular cab. You mean these specs? Quote Link to comment Share on other sites More sharing options...
fordmantpw Posted September 26, 2019 Share Posted September 26, 2019 I think it's time to upgrade. My 440 HP/925 ft-lb version just ain't cutting it any more. </sarcasm> That's just incredible! 2 Quote Link to comment Share on other sites More sharing options...
HotRunrGuy Posted September 26, 2019 Share Posted September 26, 2019 8 minutes ago, akirby said: You mean these specs? That's interesting, the version I'm looking at has 7 pages, and the regular cab is the last one shown above the warranty statement. HRG Quote Link to comment Share on other sites More sharing options...
akirby Posted September 26, 2019 Share Posted September 26, 2019 I followed the link in post 1 then the link to the 2020 F series product page, then Superduty Tech Specs and the Tech Specs PDF: What I posted above is page 7. Here's the direct link: https://media.ford.com/content/dam/fordmedia/North America/US/product/2020/f-series-super-duty/2020-Super-Duty-Tech-Specs.pdf Quote Link to comment Share on other sites More sharing options...
twintornados Posted September 26, 2019 Share Posted September 26, 2019 Sounds good, but Dodg....err, I mean, RAM hit the 1,000 ft lbs mark first so this will not be heralded as loudly....next computer flash from GM will put the Dura motor up or over 1K too... Quote Link to comment Share on other sites More sharing options...
HotRunrGuy Posted September 26, 2019 Share Posted September 26, 2019 7 minutes ago, akirby said: I followed the link in post 1 then the link to the 2020 F series product page, then Superduty Tech Specs and the Tech Specs PDF: What I posted above is page 7. Here's the direct link: https://media.ford.com/content/dam/fordmedia/North America/US/product/2020/f-series-super-duty/2020-Super-Duty-Tech-Specs.pdf Nope, can't see what you're seeing. I'm sure once the 2020 RV/truck towing guide is released it will be there. HRG Quote Link to comment Share on other sites More sharing options...
akirby Posted September 26, 2019 Share Posted September 26, 2019 23 minutes ago, HotRunrGuy said: Nope, can't see what you're seeing. I'm sure once the 2020 RV/truck towing guide is released it will be there. HRG If you click on the pdf link above you don't see what I posted as the last page? If not you must have a cached older version. Quote Link to comment Share on other sites More sharing options...
HotRunrGuy Posted September 26, 2019 Share Posted September 26, 2019 2 minutes ago, akirby said: If you click on the pdf link above you don't see what I posted as the last page? If not you must have a cached older version. I even tried a different computer, using a different browser, and still don't see what you can. Mom always did like you better,,,,,,, HRG Quote Link to comment Share on other sites More sharing options...
akirby Posted September 26, 2019 Share Posted September 26, 2019 1 Quote Link to comment Share on other sites More sharing options...
92merc Posted September 26, 2019 Share Posted September 26, 2019 We just knew they weren't going to let RAM claim the most torque trophy for very long. Quote Link to comment Share on other sites More sharing options...
Deanh Posted September 27, 2019 Share Posted September 27, 2019 22 hours ago, twintornados said: Sounds good, but Dodg....err, I mean, RAM hit the 1,000 ft lbs mark first so this will not be heralded as loudly....next computer flash from GM will put the Dura motor up or over 1K too... not sure I would bet on that...I heard a while ago the Duramax was close to its limits...but the Powerstroke still had plenty in reserve....so remains to be seen...but god almighty 1050 ft lbs!!!!!!!!!!!!!!!! 1 Quote Link to comment Share on other sites More sharing options...
twintornados Posted September 27, 2019 Share Posted September 27, 2019 10 minutes ago, Deanh said: not sure I would bet on that...I heard a while ago the Duramax was close to its limits...but the Powerstroke still had plenty in reserve....so remains to be seen...but god almighty 1050 ft lbs!!!!!!!!!!!!!!!! You would think that the last of the Big 3 pickup truck makers with a diesel power option will "turn up the heat" and re-do the block in CGI (currently, still cast as 'grey' cast iron) so they can best their competition. What say you @CGIron?? Quote Link to comment Share on other sites More sharing options...
fordmantpw Posted September 27, 2019 Share Posted September 27, 2019 I would be happy with 400 HP / 800 ft-lbs and 2 more MPG. Quote Link to comment Share on other sites More sharing options...
J-150 Posted September 27, 2019 Share Posted September 27, 2019 1 hour ago, Deanh said: not sure I would bet on that...I heard a while ago the Duramax was close to its limits...but the Powerstroke still had plenty in reserve....so remains to be seen...but god almighty 1050 ft lbs!!!!!!!!!!!!!!!! Maybe their new partner Navistar can rework the 444 for them ? 1 Quote Link to comment Share on other sites More sharing options...
CGIron Posted September 27, 2019 Share Posted September 27, 2019 2 hours ago, twintornados said: You would think that the last of the Big 3 pickup truck makers with a diesel power option will "turn up the heat" and re-do the block in CGI (currently, still cast as 'grey' cast iron) so they can best their competition. What say you @CGIron?? I say that Duramax is in a heavy state of backlogging due to their stubborn ideas about NOT letting the CGI in instead of their almost antique grey iron. Quote Link to comment Share on other sites More sharing options...
MY93SHO Posted September 27, 2019 Share Posted September 27, 2019 (edited) On 9/26/2019 at 1:22 PM, twintornados said: Sounds good, but Dodg....err, I mean, RAM hit the 1,000 ft lbs mark first so this will not be heralded as loudly....next computer flash from GM will put the Dura motor up or over 1K too... It's a little more than a flash away. Ford did a lot of work on this 3rd generation. Upgraded oiling system, higher fuel pressures, new turbo design, more compression with steel pistons instead of aluminum. The Ram is way down on hp compared to the Ford. And they still have a 6 speed compared to the other 2 brands having 10 speeds. Edited September 27, 2019 by MY93SHO Quote Link to comment Share on other sites More sharing options...
HotRunrGuy Posted September 27, 2019 Share Posted September 27, 2019 On 9/26/2019 at 1:17 PM, akirby said: I followed the link in post 1 then the link to the 2020 F series product page, then Superduty Tech Specs and the Tech Specs PDF: What I posted above is page 7. Here's the direct link: https://media.ford.com/content/dam/fordmedia/North America/US/product/2020/f-series-super-duty/2020-Super-Duty-Tech-Specs.pdf Well, something is different today. When I click on that link, the pdf is now 8 pages, with the SCab and SCrew 5th wheel/Gooseneck shown on page 8. All is good with the world. HRG Quote Link to comment Share on other sites More sharing options...
HotRunrGuy Posted September 27, 2019 Share Posted September 27, 2019 Mile Levine is havin' some fun with this,,,,, https://twitter.com/mrlevine?lang=en HRG Quote Link to comment Share on other sites More sharing options...
twintornados Posted September 27, 2019 Share Posted September 27, 2019 3 hours ago, CGIron said: I say that Duramax is in a heavy state of backlogging due to their stubborn ideas about NOT letting the CGI in instead of their almost antique grey iron. Man!!! That was almost TOO easy.... 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.