theoldwizard Posted October 31, 2020 Share Posted October 31, 2020 Why ? Coyote Ugly: Is Ford reverting to Windsor V-8s with pushrod power? The clearly it would go in the F-Series (F150/F250) and maybe the Mustang. The only reason I can imagine is that the Coyote is very expensive to build. 1 Quote Link to comment Share on other sites More sharing options...
silvrsvt Posted October 31, 2020 Share Posted October 31, 2020 Because the modular V8 is 30 years old? I don’t see the 6.8 completely replacing the modular V8 in the Mustang. I see being used as the range topper models I’m also assuming the 6.8L works better with natural gas conversions too. Quote Link to comment Share on other sites More sharing options...
Bob Rosadini Posted October 31, 2020 Share Posted October 31, 2020 2 hours ago, silvrsvt said: Because the modular V8 is 30 years old? I don’t see the 6.8 completely replacing the modular V8 in the Mustang. I see being used as the range topper models I’m also assuming the 6.8L works better with natural gas conversions too. This would have to be a key consideration assuming that is true. Quote Link to comment Share on other sites More sharing options...
Sevensecondsuv Posted October 31, 2020 Share Posted October 31, 2020 If this comes attached to a manual transmission in a mustang I'll take back every bad thing I've ever said about Ford! Quote Link to comment Share on other sites More sharing options...
Sevensecondsuv Posted October 31, 2020 Share Posted October 31, 2020 Now the next question - is this a destroked version of the 7.3? Or could this be a coyote with more cylinders? Probably the former considering complexity and unit cost. I bet the 7.3 costs a lot less to make than a 3.5 ecoboost which is where the business case is coming from. Makes total sense for a top engine in F150. Quote Link to comment Share on other sites More sharing options...
fuzzymoomoo Posted October 31, 2020 Share Posted October 31, 2020 1 hour ago, Sevensecondsuv said: Now the next question - is this a destroked version of the 7.3? Or could this be a coyote with more cylinders? Probably the former considering complexity and unit cost. I bet the 7.3 costs a lot less to make than a 3.5 ecoboost which is where the business case is coming from. Makes total sense for a top engine in F150. It doesn't sound like it has anything at all to do with Coyote, and I highly doubt Ford ever makes anything bigger than a V8 ever again. Quote Link to comment Share on other sites More sharing options...
7Mary3 Posted October 31, 2020 Share Posted October 31, 2020 Story I hear is that the 6.8L will be an aluminum block high performance version of the 7.3L. Which is a great idea. 2 Quote Link to comment Share on other sites More sharing options...
probowler Posted October 31, 2020 Share Posted October 31, 2020 Would be really cool to buy a new Bronco with a proper Windsor V8 again ? 2 1 Quote Link to comment Share on other sites More sharing options...
SteelyD Posted October 31, 2020 Share Posted October 31, 2020 10 minutes ago, probowler said: Would be really cool to buy a new Bronco with a proper Windsor V8 again ? The 6.8 is the V-8 Hurricane Boss. (Godzilla) 1 Quote Link to comment Share on other sites More sharing options...
SteelyD Posted October 31, 2020 Share Posted October 31, 2020 2 hours ago, Sevensecondsuv said: Now the next question - is this a destroked version of the 7.3? Or could this be a coyote with more cylinders? Probably the former considering complexity and unit cost. I bet the 7.3 costs a lot less to make than a 3.5 ecoboost which is where the business case is coming from. Makes total sense for a top engine in F150. https://www.thedrive.com/news/37374/6-8-liter-windsor-pushrod-v8-coming-to-2022-ford-m Quote Link to comment Share on other sites More sharing options...
FR739 Posted October 31, 2020 Share Posted October 31, 2020 I guess I don’t see the point unless this is similar to what Chrysler does with the 6.4L SRT V8 and the 6.2L Hellcat V8. But a .5L difference doesn’t seem like it’s worth the effort when they would be covering that many bases. I’d love to see what a modern designed 5.8L could do in terms of power. Talk about a throwback. Having the 5.0L and 351ci in the lineup would be so cool. I am glad that it’s pushrod though. I think GM and Chrysler have proven that pushrod V8s are fantastic engines and the packaging advantages are huge. 1 Quote Link to comment Share on other sites More sharing options...
slemke Posted October 31, 2020 Share Posted October 31, 2020 1 hour ago, fuzzymoomoo said: It doesn't sound like it has anything at all to do with Coyote, and I highly doubt Ford ever makes anything bigger than a V8 ever again. There goes hope of a 6.0l nano v-12. Quote Link to comment Share on other sites More sharing options...
SteelyD Posted October 31, 2020 Share Posted October 31, 2020 35 minutes ago, FR739 said: I guess I don’t see the point unless this is similar to what Chrysler does with the 6.4L SRT V8 and the 6.2L Hellcat V8. But a .5L difference doesn’t seem like it’s worth the effort when they would be covering that many bases. I’d love to see what a modern designed 5.8L could do in terms of power. Talk about a throwback. Having the 5.0L and 351ci in the lineup would be so cool. I am glad that it’s pushrod though. I think GM and Chrysler have proven that pushrod V8s are fantastic engines and the packaging advantages are huge. The 6.8 is the Hurricane Boss not a Windsor. A smaller 7.3. Quote Link to comment Share on other sites More sharing options...
jpd80 Posted October 31, 2020 Share Posted October 31, 2020 36 minutes ago, SteelyD said: The 6.8 is the V-8 Hurricane Boss. (Godzilla) The only thing Godzilla shares with the Boss is the bore spacing dimension. Deck height, timing cover, oil pump, water pump are all different as is cam in block. 1 Quote Link to comment Share on other sites More sharing options...
Stray Kat Posted October 31, 2020 Share Posted October 31, 2020 Get ready for a bored and stroked 6.2 Boss engine with possibly 3 valve heads because I have a strong feeling we’re gonna be very surprised with this one. The tooling on the 6.2 is far too underused to abandon this quickly. There may even a Coyote version of the 6.8. Ford has a huge amount of investment in the Coyote design. Quote Link to comment Share on other sites More sharing options...
SteelyD Posted October 31, 2020 Share Posted October 31, 2020 8 minutes ago, jpd80 said: The only thing Godzilla shares with the Boss is the bore spacing dimension. Deck height, timing cover, oil pump, water pump are all different as is cam in block. The 6.8 is a smaller displacement 7.3 Hurricane Boss Godzilla. DUH Quote Link to comment Share on other sites More sharing options...
jpd80 Posted October 31, 2020 Share Posted October 31, 2020 (edited) 11 minutes ago, SteelyD said: The 6.8 is a smaller displacement 7.3 Hurricane Boss Godzilla. DUH So you're saying that Brian Wolfe started with the original 6.2 block and just changed it enough to get 7.3 litres, added pushrod and wedge heads? Yeah I can go with that. So why didn't they build the 7.3 on the existing 6.2 line? Edited October 31, 2020 by jpd80 1 Quote Link to comment Share on other sites More sharing options...
White99GT Posted October 31, 2020 Share Posted October 31, 2020 (edited) I sure hope the new 6.8 is a larger bore/larger valve version of the 6.2 Boss and not a de-bored or de-stroked Godzilla. Edited October 31, 2020 by White99GT Quote Link to comment Share on other sites More sharing options...
White99GT Posted October 31, 2020 Share Posted October 31, 2020 18 minutes ago, SteelyD said: The 6.8 is a smaller displacement 7.3 Hurricane Boss Godzilla. DUH Its two different engine families. Hurricane/Boss is the 6.2 splayed-valve OHC engine Godzilla is the 7.3 in-line valve pushrod V8. They share the same 4.53” bore spacing but are much too different to say they share the same architecture. The Boss is a better performance foundation with more HP potential than Godzilla if displacement is relatively close. 1 Quote Link to comment Share on other sites More sharing options...
White99GT Posted October 31, 2020 Share Posted October 31, 2020 38 minutes ago, jpd80 said: The only thing Godzilla shares with the Boss is the bore spacing dimension. Deck height, timing cover, oil pump, water pump are all different as is cam in block. They also share main and rod journal diameters. Ford pretty clearly started with the Boss and then engineered a cheaper 7.3 pushrod engine out of it. They are definitely different architectures for sure but Godzilla pretty clearly wasn’t a carte blanche clean sheet design. Quote Link to comment Share on other sites More sharing options...
White99GT Posted October 31, 2020 Share Posted October 31, 2020 (edited) 53 minutes ago, Stray Kat said: Get ready for a bored and stroked 6.2 Boss engine with possibly 3 valve heads because I have a strong feeling we’re gonna be very surprised with this one. The tooling on the 6.2 is far too underused to abandon this quickly. There may even a Coyote version of the 6.8. Ford has a huge amount of investment in the Coyote design. No domestic small block V8 to date has as much inherent potential as the Boss architecture. The idea of a 4V cylinder head (or even a larger valve/larger port version of the current 6.2 splayed-valve SOHC 2V head) on a 4.53” bore spacing pretty much makes every other 4.400” spacing pushrod V8 eternally irrelevant. It’s up to Ford to take advantage of those advantages, hopefully the 6.8 is exactly that. Edited October 31, 2020 by White99GT 2 Quote Link to comment Share on other sites More sharing options...
jpd80 Posted October 31, 2020 Share Posted October 31, 2020 (edited) 14 minutes ago, White99GT said: They also share main and rod journal diameters. Ford pretty clearly started with the Boss and then engineered a cheaper 7.3 pushrod engine out of it. They are definitely different architectures for sure but Godzilla pretty clearly wasn’t a carte blanche clean sheet design. Absolutely, otherwise Brian Wolfe would have opted for a wider bore spacing to avoid using those cooling slots in the top of the block, make it 4.63", a modern low deck FE but I'm digressing.... If Ford was looking to make a 6.8 Boss, why wouldn't it just give the 6.2 a siamesed bore block like the 7.3? We know that the 6.2 engine line is ending before 2022, so whatever is planned will come on 7.3 architecture. The 6.2's shorter 3.74 crank stroke would indeed turn a 7.3 into a revived 6.8 and from there, the sky is the limit. Edited October 31, 2020 by jpd80 Quote Link to comment Share on other sites More sharing options...
White99GT Posted October 31, 2020 Share Posted October 31, 2020 It’s just seems like the 6.2 line was underutilized. I’m still holding out hope for 6.2 with 7.3 bore diameter and larger valves. I’m really hoping Ford sticks with that “no pushrods in the cars” mentality. I’m not impressed with Godzilla at all. It’s not setting new performance benchmarks by any stretch. Even that 12.5:1, aluminum rod, 8000 rpm 7.3 Brian Wolfe built (790 gross crank HP) was underwhelming. Quote Link to comment Share on other sites More sharing options...
jpd80 Posted October 31, 2020 Share Posted October 31, 2020 (edited) 23 minutes ago, White99GT said: It’s just seems like the 6.2 line was underutilized. I’m still holding out hope for 6.2 with 7.3 bore diameter and larger valves. I’m really hoping Ford sticks with that “no pushrods in the cars” mentality. I’m not impressed with Godzilla at all. It’s not setting new performance benchmarks by any stretch. Even that 12.5:1, aluminum rod, 8000 rpm 7.3 Brian Wolfe built (790 gross crank HP) was underwhelming. Just remember that those heads were intended for truck use not screaming to 8,000 rpm. They're much smaller than the 6.2 Boss's sewer ports, so whatever Ford is planning will be different.. Also, port EFI generally doesn't play well with longer duration cams, a proper carb tunnel ram manifold would have given a lot more power. The torque curve peaked at 558 lb ft but stayed almost flat up to 7500 rpm, whatever Brian was doing wasn't out and out max horsepower, with E85, that would be a mean street engine. Edited October 31, 2020 by jpd80 Quote Link to comment Share on other sites More sharing options...
30 OTT 6 Posted October 31, 2020 Share Posted October 31, 2020 As V8's are getting rarer and rarer their last refuge will be in pick-up trucks and heavy duty trucks. So if Ford wants pare down to one V8 architecture in it's lineup it is going to be the Godzilla. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.