Jump to content

02 escape 3.0 oil problem


jchristman92

Recommended Posts

I took the subframe with engine out of a vehicle that was totaled and it was leaking pretty bad so i decided to reseal the engine involving timing cover, valve covers and oil pan. I replaced the pcv valve because of a puddle of oil behind the throttle body and it did seem like it did stick and before i removed the engine it ran great and smooth and i did a compression check on the front 3 cylinders and they all read about 225 psi. i just did spark plugs after the reseal and looked inside of the cylinders and some of them looked oily, could it be the pcv valve or is the engine bad, cylinder 4 through 6 had the 225 compression which i thought was great.

Cylinder 6 (3).JPG

Cylinder 6 (2).JPG

Cylinder 5 (2).JPG

Cylinder 5 (1).JPG

Cylinder 4 (2).JPG

Cylinder 4 (1).JPG

Cylinder 3 (1).JPG

Cylinder 2 (4).JPG

Cylinder 2 (3).JPG

Cylinder 2 (2).JPG

Cylinder 3 (2).JPG

cylinder 1 (2).JPG

cylinder 1 (1).JPG

Link to comment
Share on other sites

  • 3 weeks later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...