sagosto Posted July 21, 2021 Share Posted July 21, 2021 Is there an easy way to hardwire a radar detector w/o running wire down the roof to a fuse panel? I am guessing a 12V switch and a ground so that the radar turns on when ignition is ON and automatically turns off when ignition is turned off. Quote Link to comment Share on other sites More sharing options...
Kartergreg Posted July 22, 2021 Share Posted July 22, 2021 You could pull the panel above the rear view mirror as there is power there. You would have to probe the wires and find a combination that is on with the ignition. I thought about that when I installed mine but decided it would be easier to run a wire under the front edge of the headliner and down the drivers side A pillar to the fuse panel there just below the dash. Was so easy and quick. Also found the right ignition controlled fuse to use. Quote Link to comment Share on other sites More sharing options...
aerodrum89 Posted July 23, 2021 Share Posted July 23, 2021 I hardwired an Escort radar detector in my 2015 Edge. Connected to the auto dimming mirror / forward facing camera / wiper sensor. I’ll link the website I used to reference which wires to connect to if I can find it. The detector gets power when the car is turned on only. Also, I probably could have done a better job with strain relief of the wires and a better job removing the plastic cover to access the wires. Quote Link to comment Share on other sites More sharing options...
aerodrum89 Posted July 23, 2021 Share Posted July 23, 2021 Here’s a link to the site I used. If you search for your car make/model/year, it’ll tell you what is compatible and show you instructions. https://blendmount.com/mirrortap/ Quote Link to comment Share on other sites More sharing options...
aerodrum89 Posted September 6, 2021 Share Posted September 6, 2021 On 7/21/2021 at 7:33 PM, Kartergreg said: You could pull the panel above the rear view mirror as there is power there. You would have to probe the wires and find a combination that is on with the ignition. I thought about that when I installed mine but decided it would be easier to run a wire under the front edge of the headliner and down the drivers side A pillar to the fuse panel there just below the dash. Was so easy and quick. Also found the right ignition controlled fuse to use. Would you mind sharing photos of your installation? I’m particularly interested in the mount to the mirror and the path that the wire takes to get to the fuse box (and how the wire is hidden). Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.