Jump to content

"We're Here For The Work That Makes America Work"


Recommended Posts

2 hours ago, GearheadGrrrl said:

And now we're down to essentially only four class 8 manufacturers and a new tandem drive sleeper cab tractor is $150K and up. Ford could have been one of those four surviving manufacturers...


Did you ever stop and ask yourself why there are only 4......

Link to comment
Share on other sites

16 hours ago, GearheadGrrrl said:

And now we're down to essentially only four class 8 manufacturers and a new tandem drive sleeper cab tractor is $150K and up. Ford could have been one of those four surviving manufacturers...

 

But, that is if you are only looking at North America....in other parts of the world, Ford is still a major player - either directly through Ford branded products or only invested through with names like JMC......

Link to comment
Share on other sites

I just got around to looking at sales for the month of November, and 'Heavy Truck' (650 and 750) sales are down 27.3% compared to November 2024.  For 2025, year to date 650/750 sales are down 17.5%.  Those are substantial numbers, but I think it is important to consider the market.  Year to date, class 5-7 sales are down 9%, but Ford still managed to sell nearly 2,500 class 6 trucks, leading the market.  It is interesting to note that only a very small percentage of those class 6 sales were F-650's, most were F-550's and F-600's.  It looks to me like while F-650 and F-750 sales are in a step decline outpacing the overall market decline, Ford has been able to maintain leadership in class 6 with strong F-550 and F-600 sales.  If Ford were to drop the 650 and 750 of course it would end their negligible class 7 sales, but it would appear to have little effect on Ford's class 6 sales.

 

Note that overall class 4-7 sales were down a whopping 25% in October compared to October 2024, but much of that was attributable to the effect of tariffs on class 4 and 5.  Some Isuzu trucks are still imported from Japan and all of the larger Ram models are imported from Mexico, and they are big players in class 4 and 5.

Edited by 7Mary3
Link to comment
Share on other sites

On 12/8/2025 at 5:57 PM, 7Mary3 said:

I just got around to looking at sales for the month of November, and 'Heavy Truck' (650 and 750) sales are down 27.3% compared to November 2024.  For 2025, year to date 650/750 sales are down 17.5%.  Those are substantial numbers, but I think it is important to consider the market.  Year to date, class 5-7 sales are down 9%, but Ford still managed to sell nearly 2,500 class 6 trucks, leading the market.  It is interesting to note that only a very small percentage of those class 6 sales were F-650's, most were F-550's and F-600's.  It looks to me like while F-650 and F-750 sales are in a step decline outpacing the overall market decline, Ford has been able to maintain leadership in class 6 with strong F-550 and F-600 sales.  If Ford were to drop the 650 and 750 of course it would end their negligible class 7 sales, but it would appear to have little effect on Ford's class 6 sales.

 

Note that overall class 4-7 sales were down a whopping 25% in October compared to October 2024, but much of that was attributable to the effect of tariffs on class 4 and 5.  Some Isuzu trucks are still imported from Japan and all of the larger Ram models are imported from Mexico, and they are big players in class 4 and 5.

7m..Just where do you get those stats?  I remember when HDT published those monthly numbers but no longer.

By the way, I would guess a very high percentage of 750 sales are NOT class 7's but but are technically class 6's as they carry 25,999 plates..or "Tax cheaters" as I call them.  I was at "Quick Lube" last week and that dealer is a Ford Pro dealer with a very active 650/750 business.  While I was there a mechanic for one of New Englands biggest construction equipment dealers (9 locations) was picking up his truck.  A 750 with a IMT service body- the works, welder, air compressor, good sized hydraulic crane and a lot of compartments -also was a Super Cab with no seats-that storage space for his cold weather gear etc. Thing had big rubber so I assumed was a true 33,000 GVW.  Open door and 25,999 plate!  A 33 plate would usually be a 10/23 or 12/21 axle set up

but can a manufacturer install heavier components and simply derate the component as they choose..Or does the supplier component rating must be adhered too...going upward would of course not be allowed but how about a derate???

 

And by the way this guy was a big guy-6-2 or taller and he had no trouble with the cab size and the Power Stroke had plenty of power to handle that IMT package.  He liked the truck!

Link to comment
Share on other sites

  • 6 months later...
  • 3 months later...

Remember one thing: Ford's medium duty sales are from Ford not doing much to market them! Like Bob and I have said, all these fuel oil delivery trucks in my area are PACCAR Kenworths and Peterbilts!  They should be Fords! And we've seen Peterbilt is stealing the U-Haul class 6 biz. Because somebody at PACCAR went out and sold it!  I've seen twice now an outfit that specializes in Peterbilt repair and service but there's nothing on this red van mentioning Kenworth, but I'm quite sure the name PACCAR is on the side. I can't understand it. BTW, the van is a Ford Transit!

 

I can't justify starting a new thread for this, but check this out.

This is what we're facing in the future. This is why Farley says Ford  dealers can't get the 12,000 mechanics they need.

 

I realize we're talking about obsolete carburetors, but these latest generations don't want to learn auto repair even for today's vehicles and if they do want to, they can't cut the mustard. 

 

Classic Car Museum Is Closing After Failing to Find a Carburetor Mechanic - Autoblog

Edited by Joe771476
Link to comment
Share on other sites

47 minutes ago, Joe771476 said:

Remember one thing: Ford's medium duty sales are from Ford not doing much to market them! Like Bob and I have said, all these fuel oil delivery trucks in my area are PACCAR Kenworths and Peterbilts!


You're absolutely right.  I see Kenworth and Peterbilt ads constantly!  They're everywhere!  Saw 50 during today's football games.

Link to comment
Share on other sites

13 hours ago, Joe771476 said:

I realize we're talking about obsolete carburetors, but these latest generations don't want to learn auto repair even for today's vehicles and if they do want to, they can't cut the mustard. 

 

Classic Car Museum Is Closing After Failing to Find a Carburetor Mechanic - Autoblog

 

Of course, the owner of the Classic Car Museum is also retiring, so there is always that....

 

Quote

Terry Stetler is an important member of the team, as he’s the mechanic who keeps the fleet running. However, Stetler is retiring, and Snook couldn’t find a successor for the longtime mechanic. As such, Jeff Snook is also retiring from the car museum business, as there was no one around who could continue what Stetler had started.

 

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...