Jump to content

Ford CEO Jim Farley Says New, Affordable Midsize Pickup Coming Next Year


Recommended Posts

https://fordauthority.com/2026/11/ford-ceo-jim-farley-says-new-affordable-midsize-pickup-coming-next-year/

 

Quote

"Alongside strengthening our best franchises, we're opening new paths to grow at more affordable price points next year. We'll be launching our pickup for international markets," Farley said during Ford's Q3 2026 earnings call with investors. "We expect the base material cost for this truck to be 20 percent lower than today's Ranger, just as Maverick has done in the U.S. This truck is designed to bring new customers into the Ford truck lineup internationally at a cost structure that allows us to compete, in this case with the Chines

 

Link to comment
Share on other sites

2 hours ago, akirby said:

I told you guys this is what F100 would be - a drastically cheaper to build Ranger replacement including lots of commercial and fleet options.

Hmmm, I'm thinking this is a built in China truck for international markets (not North America). And if that is right, then it won't be marketed/sold as the F-100 since F series trucks are almost exclusively North America trucks. It certainly won't be built at TTP since Farley told us that the affordable ICE truck coming from TTP will debut in the 2029 time frame.

 

Ford has already confirmed the next generation Ranger is currently being developed in Australia:

  https://www.drive.com.au/news/ford-ranger-next-generation-already-being-worked-on-in-australia/

Edited by Texasota
Link to comment
Share on other sites

2 hours ago, Texasota said:

Hmmm, I'm thinking this is a built in China truck for international markets (not North America). And if that is right, then it won't be marketed/sold as the F-100 since F series trucks are almost exclusively North America trucks. It certainly won't be built at TTP since Farley told us that the affordable ICE truck coming from TTP will debut in the 2029 time frame.

 

Ford has already confirmed the next generation Ranger is currently being developed in Australia:

  https://www.drive.com.au/news/ford-ranger-next-generation-already-being-worked-on-in-australia/


I guess that fits the timeline better.  

Link to comment
Share on other sites

14 hours ago, akirby said:

I told you guys this is what F100 would be - a drastically cheaper to build Ranger replacement including lots of commercial and fleet options.

 

But this isn't going to be an F100, it looks like it might be an international version of the Maverick? 

Link to comment
Share on other sites

16 hours ago, akirby said:

I told you guys this is what F100 would be - a drastically cheaper to build Ranger replacement including lots of commercial and fleet options.

 

As pointed out, the comments sound like an international truck not coming to the US market.

Link to comment
Share on other sites

16 hours ago, akirby said:

I told you guys this is what F100 would be - a drastically cheaper to build Ranger replacement including lots of commercial and fleet options.

I think the f100 has serious potential for fleet buyers in particular, but I feel like Ford is just making their truck lineup way oversaturated.

 

Fathom, maverick, f100, bronco pickup, potentially keeping the ranger overseas, f-150, super duty, f-650. 

 

I just feel like when the pie is already sliced this thin, it's just a case of diminishing returns. 

 

Of all of them, I'm probably most excited for the bronco pickup. The ranger doesn't really have a strong identity right now. Replacing it with a boxy struck that ideally looked like the scout truck or a Rivian, with beefed up comments from something like the ranger super duty to make it more capable than basically any other midsized pickup while costing basically the same as a Tacoma would be an awesome product. 

Link to comment
Share on other sites

55 minutes ago, rmc523 said:

It's probably too fast for a global Maverick using CE1 learnings (potential gigacasting etc).

I'm trying to think of what ICE products would have CE1 learnings apllied to them first. They could make Ford's trucks even higher quality and more profitable. But because it's such a radical new assembly and engineering method, I don't see Ford gambling their truck lineup on that this early on. 

Link to comment
Share on other sites

1 minute ago, DeluxeStang said:

Of all of them, I'm probably most excited for the bronco pickup. The ranger doesn't really have a strong identity right now. Replacing it with a boxy struck that ideally looked like the scout truck or a Rivian, with beefed up comments from something like the ranger super duty to make it more capable than basically any other midsized pickup while costing basically the same as a Tacoma would be an awesome product. 

 

I don't see the Bronco pickup really selling in huge numbers vs say the outgoing Ranger. 

 

The F-100 (if its basically a HD Ranger) would fix most of the issues the Ranger has.

  • Like 2
Link to comment
Share on other sites

36 minutes ago, DeluxeStang said:

I'm trying to think of what ICE products would have CE1 learnings apllied to them first. They could make Ford's trucks even higher quality and more profitable. But because it's such a radical new assembly and engineering method, I don't see Ford gambling their truck lineup on that this early on. 

Ford vehicle parts

 

 

I think we'll see targeted areas of CE1 things applied to F-series.   For one thing, with a BOF design, I'm not sure how much they actually can apply a gigacasting to such a design, unless they somehow have a full frame cab back and "megabolt" a front section on?   I think we'll see more learnings like wiring simplification and under the skin tech applied to reduce costs.  Remember there were also the rumors of steer by wire and things like that.

 

I'd actually go the other way and say that F-series is actually one of the areas Ford IS willing to push forward on, as it's the flagship of the company.  But I don't think we'll see a full gigacasting approach for it (like I said above, I don't even know if that's possible).

 

I think Maverick itself would be a perfect candidate for CE1 learnings, and by extension the reported Maverick-based models.  I was saying over at GMI, I wonder when Maverick is due for a full redesign.  By the time Fathom debuts, Maverick will be 6 years old, and theoretically getting ready for a redesign.

 

34 minutes ago, Sherminator98 said:

 

I don't see the Bronco pickup really selling in huge numbers vs say the outgoing Ranger. 

 

The F-100 (if its basically a HD Ranger) would fix most of the issues the Ranger has.

 

It's truly hard to gauge the midsize sales potential for Ford, IMO.

 

They have Maverick, which is doing great, and obviously have F-series above doing great too.

 

Ranger is stuck in the middle with a global design that doesn't quite seem to align with US tastes.  It did well initially in 2019, but has fallen off since Maverick (and Bronco) arrived.

 

That said, you look at Tacoma, and it was at 214k sales through Q3, dwarfing Maverick and Ranger sales combined (175k).......obviously they don't (yet) have a Maverick entrant, nor does Tundra do F-series numbers, but even Colorado is selling 20k more than Ranger.

 

I think an F-100 more tailored to US buyers could potentially get closer to Maverick numbers, but if you're also throwing in a Bronco truck in there, you're shrinking the buyer pool for both.  I'd see it selling similar to Gladiator numbers - roughly 50k per year.

 

I think Ford is hoping Fathom appeals to a completely new set of buyers outside the brand, though I see it taking a bite out of Maverick numbers (10-15% maybe?).

Link to comment
Share on other sites

3 minutes ago, rmc523 said:

I think Maverick itself would be a perfect candidate for CE1 learnings, and by extension the reported Maverick-based models.  I was saying over at GMI, I wonder when Maverick is due for a full redesign.  By the time Fathom debuts, Maverick will be 6 years old, and theoretically getting ready for a redesign.

 

The Maverick got a MCE back in 2025 after launching as a 2022 product

 

I'd expect it to get some sort of update in another 2 years

 

What is the time line for the small CUV and Bronco Sport replacements? 

 

I'd guess we'd see some sort of major change in 2029 that helps Aline the Maverick with these other ICE/HEV C2 products. 

Link to comment
Share on other sites

6 minutes ago, Sherminator98 said:

 

The Maverick got a MCE back in 2025 after launching as a 2022 product

 

I'd expect it to get some sort of update in another 2 years

 

What is the time line for the small CUV and Bronco Sport replacements? 

 

I'd guess we'd see some sort of major change in 2029 that helps Aline the Maverick with these other ICE/HEV C2 products. 

 

Weren't we hearing 2028-9 on those?

 

I think Bronco itself is 2030?  

Link to comment
Share on other sites

1 hour ago, DeluxeStang said:

I'm trying to think of what ICE products would have CE1 learnings apllied to them first. They could make Ford's trucks even higher quality and more profitable. But because it's such a radical new assembly and engineering method, I don't see Ford gambling their truck lineup on that this early on. 

Ford vehicle parts

 

We already know the CD6 expansion is being slowed to incorporate CE1 elements to reduce costs. That platform seems like it could be a candidate for uni-castings among other CE1 learnings.

 

For BOF products I don’t see uni-castings but zonal electrical architecture to enable SDV, steer by wire and brake by wire seem very plausible.

Link to comment
Share on other sites

I predicted this almost a year ago. Behold, the "Bronco Sport Trac"!
*EDIT - definitely tongue-in-cheek on this one. At no point do I think Ford should build a Bronco Sport Trac!
Yes, it's an MS Paint "Temu Photoshop" mash-up of a Bronco Sport and a Maverick from Build and Price. And not particularly well done at that. 😂 BUT, when I put this into one of the Facebook Maverick groups, it actually got more kudos than I thought it deserved.
No photo description available.
Actually, with all the talk of a Bronco based truck, doing a regular cab built on the regular Bronco satisfies a couple holes in the market. There isn't a regular cab small truck in the US market, so much like the Maverick, Ford has an opportunity to literally create a vehicle niche. Use the 4-door wheelbase for the truck, make a 2-door and a 4-door, changing the box size accordingly. That's some super pipe-dream level stuff, but it'd be interesting to see Ford take that particular leap.

Edited by BenKohnen
Being silly
Link to comment
Share on other sites

9 minutes ago, BenKohnen said:

I predicted this almost a year ago. Behold, the "Bronco Sport Trac"!
Yes, it's an MS Paint "Temu Photoshop" mash-up of a Bronco Sport and a Maverick from Build and Price. And not particularly well done at that. 😂 BUT, when I put this into one of the Facebook Maverick groups, it actually got more kudos than I thought it deserved.
No photo description available.
Actually, with all the talk of a Bronco based truck, doing a regular cab built on the regular Bronco satisfies a couple holes in the market. There isn't a regular cab small truck in the US market, so much like the Maverick, Ford has an opportunity to literally create a vehicle niche. Use the 4-door wheelbase for the truck, make a 2-door and a 4-door, changing the box size accordingly. That's some super pipe-dream level stuff, but it'd be interesting to see Ford take that particular leap.

Ford vehicle parts

 


not a chance a 2 door Bronco truck sells.  Even the 2 door Bronco isn’t selling that well, a truck would do even worse.

 

while the above idea is cute, it seems like extra work for little reward considering the Fathom and the Maverick are already there.  I don’t feel there’s a big enough difference between the Bronco Sport truck and Maverick, where at least a proper Bronco truck has a more stark difference between it and Ranger.

Link to comment
Share on other sites

9 minutes ago, BenKohnen said:

Use the 4-door wheelbase for the truck, make a 2-door and a 4-door, changing the box size accordingly. That's some super pipe-dream level stuff, but it'd be interesting to see Ford take that particular leap.

I could see that happening for the F-100 given that it will likely cater more to fleet sales than the Ranger.

Link to comment
Share on other sites

4 minutes ago, Texasota said:

I could see that happening for the F-100 given that it will likely cater more to fleet sales than the Ranger.


I think regular cabs is a no brainer for F-100 along with other fleet configurations.  Lots of factory space to use up.  

  • Like 1
Link to comment
Share on other sites

5 hours ago, BenKohnen said:

I predicted this almost a year ago. Behold, the "Bronco Sport Trac"!
*EDIT - definitely tongue-in-cheek on this one. At no point do I think Ford should build a Bronco Sport Trac!
Yes, it's an MS Paint "Temu Photoshop" mash-up of a Bronco Sport and a Maverick from Build and Price. And not particularly well done at that. 😂 BUT, when I put this into one of the Facebook Maverick groups, it actually got more kudos than I thought it deserved.
No photo description available.
Actually, with all the talk of a Bronco based truck, doing a regular cab built on the regular Bronco satisfies a couple holes in the market. There isn't a regular cab small truck in the US market, so much like the Maverick, Ford has an opportunity to literally create a vehicle niche. Use the 4-door wheelbase for the truck, make a 2-door and a 4-door, changing the box size accordingly. That's some super pipe-dream level stuff, but it'd be interesting to see Ford take that particular leap.

Ford vehicle parts

 

Obviously not happening but that looks better put together than half the photoshops on many car sites. 

Link to comment
Share on other sites

On 11/7/2026 at 12:38 PM, akirby said:


I think regular cabs is a no brainer for F-100 along with other fleet configurations.  Lots of factory space to use up.  

 

Yeah, that's true about having to fill a factory.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...