Gharri30
-
Posts
206 -
Joined
-
Last visited
Content Type
Profiles
Forums
Gallery
Downloads
Store
Posts posted by Gharri30
-
-
On 9/23/2022 at 9:02 AM, Lima said:
I’m going with the Retrax PRO MX cover ordered it last week. Price was $1999.99 free shipping. Ordered it from Tonneau Cover. Com. This will be my first bed cover!
Thinking about heading this route myself.
-
On 9/16/2022 at 9:08 AM, UT_Grandpa said:
What was the source for your hoses, connectors, valves, etc? Really nice and clean installation
About half of the air line and the fittings for the horns came with the horns themselves. A guy with a shop local to me rounded up most of everything else for the install.
-
I looked into the ARB set up when I was shopping around. A buddy of mine had a new Vixen compressor and 3 gallon tank laying around so I went that route instead. So far so good, other than it being a little slow on the refill but that's to be expected with it just being a single. I'm currently running my horns and a fitting in the bed. I'll see how it does for a while and see if a need arises to upgrade to a dual compressor.
-
1
-
-
I don't anything other than, WOW, can be said. ?♂️
-
13 hours ago, Kory04 said:
Does this mean the Lariat grill is for sale? If so and if it is a chrome one, I may be interested
It was a bap one but it's already been sold.
-
Looks way better imo. I almost changed my Lariat grill out for the high flow but opted for the platinum grill in the end.
-
3 hours ago, tcritch3 said:
It’s been a hot minute since I’ve been on the forum, nice truck @Gharri30! I love how that turned out.
Thank you, I'm pretty pleased with how it has come together. Thsnks to everyone here and thr things yall made me buy ?. I was suppose to get it ceramic coated next week but I'm currently waiting on some some bumper pieces to get painted. Brother in law got me in bumper the other week if you didn't see that, so now I have the replacement parts to fix it...?♂️. Im going to get my train horns and all that good stuff put on sometime this week so there's some good news.
-
2
-
-
Has anyone run across a full length molle style bedside rack system for either the driver and/or passenger side of the bed? I know Builtright Industries and Putco both make a system but they're 2 pcs per side that don't join in the middle.
-
I have the rear seat cover from Marathon and they fit like a glove. They are pricey as well though but you get what you pay for.
-
43 minutes ago, Adirondex said:
That sucks, a lot of people not thinking while driving. Hope you find a direct swap.
Thanks. Headed on vacation now so trying to orcastrate something while I'm gone. Thanks for the tip above too.
-
3 hours ago, Johnny Yarbrough said:
So what do you think about the ceramic tint, compare to standard. Have a truck that should deliver next week . I’m in Texas where it’s hot and dry. Just trying to compare when I go get the windows tinted.
I love it so far. Two guys I work with both have standard tint, 5% all the way around and 35% on the windshield and in my opinion my visibility is way better and reduces heat better. We're in NC and we've been sitting around 95 (100-105 heat index) for a while. Its a bit more pricey though, it cost me about $300 more than standard tint.
-
Well I was at my sisters house yesterday and had a mishap, didn't even make it a month. My brother in law caught me in the rear bumper. It's not as bad as it could have been. Need to replace the bumper, bumper bracket on passenger side and black plastic step piece. Also may need a new sensor and sensor bracket. I'm looking for a carbonized grey bumper with the sensor hole cuts outs. I know its a long shot but wanted to see if anyone out there has taken off their bumper for something aftermarket and has it laying around.
-
8 hours ago, 1972Mach1 said:
Installed the rims and tires today. Carli commuter kit in the front. I’ve got 2019 blocks in order for the rear to drop it a touch. Tires are 35x12.5x20 nitto ridge grappler.
She's a beaut!!!
-
1
-
-
I'm running a 4in lift and assuming the oem bottle jack won't suffice, I plan to test it out later on today. I carry around a plug kit and will soon get my compressor on so that I can do any small repair and get myself rolling again. For those of you running a lift, what are you carrying around in the event of a roadside or parking lot flat?
-
Can anyone provide me with pics on the bottom side of their 6 inch chrome angular running boards? I'm trying to compare them to the bottom side of the 6" black angular boards that come with my BAP. I'm trying to see if the gap fillers that I've seen the chrome boards with will mount to the black boards as I've never seen any with them. Thanks.
-
10 hours ago, Woodmnctry said:
Decals -- how does one remove the decals ? -- Specifically the FX 4 on the rear fender.
I would think if you laid a little heat to them you should be able to peel them off.
-
25 minutes ago, FirstFord22 said:
@Gharri30 buddy I can’t think of anything else! She is looking sweet! I toyed with the idea of some dark gray hood letter inserts to match the gray around the Ford oval but I think it’ll detract from the overall black appearance I was going for
I love the black exhaust tip and how it’s flush. What did you go with?
It's Borla's S-Type cat back system, 140843BC. Opted for the BC (black chrome) tip version. Just started shipping them out for the '22 7.3s not long ago. Wasn't expecting to see it until August. Although I wish it was a bit louder but I'm comparing it to my Banks Monster I had on my previous rig and it wqs indeed was a monster ?.
-
1
-
-
40 minutes ago, SpartanFan23 said:
I really like the look of the gray mirror caps! Where did you get those or did you have yours painted to match the truck color? I too have a carbonized gray BAP that is currently being shipped to the dealer. Looking for a set of 18" tremor wheels to get the look I want, but yours looks great!
What bed cover do you have?
Appreciate it. I'm happy with how it has turned out so far. The bed cover is a Leer HF650M quad fold. The caps are from BFNTruckShop. Decided about halfway through waiting for the truck that I wanted to add in some color match details and was going to just go have everything done locally once the truck got here. Then I figured I'd rather have everything waiting for me when the truck arrived and could sell everything that came off at some point.
Think I posted this pic last week of the cover but it's really the only one I have taken of it.
-
Update from when I picked her up two weeks ago. She has changed a little bit since then.
-
4
-
1
-
-
Well, just picked her up from the shop a few min ago. Since last update the windows have been tinted (5% around, 50% on windshield...went with the ceramic tint), exhaust on and now lift/wheels/tires. Grabbed a few photos, definitely needs to be washed.
What's next @FirstFord22?!? Already did grill, fender badges, ovals, mirror caps, mirror lights, bed cover, etc....... ?
-
2
-
-
Alright, I need a little help. Does anyone know the name or part number for the "running board backer" for lack of a better term between the cab and running board? Also, do they work with the BAP running boards or only with these 6" chrome angular running boards for those with any experience. I have searched for a good while with no results. This is one of my coworkers trucks and came standard on his. I kind of like how it hides being able to see through to the components hanging down under the truck when youre stepped back away from it.
-
Welp, just finished swapping out all my BAP parts (grill, ovals, fender badges, mirror caps). Also got the mirror lights swapped out for some smoked ones from Recon, got the Leer HF650M bed cover on and Tremor valance. Goes for tint on Tues and gets lift, wheels and tires done Thurs/Friday. Attached a few pics, best I have for now.
*Edit*
Forgot I threw on front wheel well liners, fender extensions and Marathon rear seat covers last weekend. The exhaust Borla jast released for the 2022 7.3s should be here today, hopefully I have time to get it on tomorrow. Also, a big thanks to @1972Mach1 for the helpful tips on the Lariat grill and rear oval removal.
Not sure why the pictures didnt upload in order. ?♂️
-
2
-
-
13 hours ago, 1972Mach1 said:
The rear oval was easy if you can remove the tailgate access panel. The video I viewed on YouTube was incorrect for my 22 when it came to removing the front grill. The entire bottom piece is held in with clips and you need to remove the 10mm bolts on top in addition to the plastic filler piece. The rest of the video was accurate. Pics are if the bottom piece to access the bottom two 10 mm bolts. Not sure if you have the same grill but FYI.
Good looking out. Think I'm going to try and tackle that this weekend .
-
Got mine put on Sat, went fairly smoothly. Also got the fender liner extensions put on as well, even simpler.
Step side panel
in F-Series SuperDuty Forum
Posted · Edited by Gharri30
If this is what youre referring to, Ford calls it a reinforcement bracket. One of the guys I work with 22 F350 came with them. I looked into them at one time but they're very pricey.