Gharri30
-
Posts
206 -
Joined
-
Last visited
Content Type
Profiles
Forums
Gallery
Downloads
Store
Posts posted by Gharri30
-
-
30 minutes ago, Cux211 said:
What would cause a truck to be “in production” for 10 days? I removed the 5thwp, AS and spray in back in January
Mine went into production on 5/2. I haven't received the built email yet but I did have the as-built data when I checked yesterday (11 days) so it should be close. Have you checked yet to see if you have that data?
-
Anyone with the 7.3 running exhaust yet? Saw Borla finally dropped one for the 22 7.3s, plus a few others. Have a Banks Monster exhaust on my current truck and want to find something with a similar sound. A good deep tone. I'll see if I can grab somewhat of a sound clip, hard to get a feel for it from the cab.
Edit....
Best I can get for now.. In cab with the windows up. Maybe I can talk my wife into a drive by later. ?
-
1
-
-
7 hours ago, RFT2112 said:
so you ordered two trucks only intending to purchase one?
Page 379
-
26 minutes ago, rxwoody said:
You should be prepared to generate some hate on this post as others of us have been confirmed long before either of your order dates and still not even scheduled. Be happy and take what you get knowing that you have put the rest of us behind while allowing your dealer to take the other and make a huge markup off of it.
18 minutes ago, TheFatInTheHat said:How do you know he doesn't need both trucks?
I dont need both but my father in law has a need for one. The one I'm hoping for is hopefully close behind.
-
Got a built email on Monday. Unfortunately not for the order I was hoping for. Both orders went into production on 5/2. One was ordered 12/27 and the other on 3/4. Received vins for both on 3/17. Still holding out hope I'll get the built email for the 12/27 order at some point this week. Hoping to get it before vacation.
-
@4thTimer my coworker didnt drive his 350 today but he just text me and said those fillers didn't come with his.
-
1
-
-
19 minutes ago, 4thTimer said:
@Gharri30 Were these included with the factory option?
https://www.ford-trucks.com/forums/1677475-front-wheel-well-liner-filler-trim.html
I'll have to check tomorrow if he drives it.
-
1
-
-
Alright, so I may have a few answers. One of my coworkers F350 XLT showed up and he got the front and rear wheel well liners. I took a peak at the fronts. To answer the question about weather or not you install over the felt type liner that comes installed, they were installed over top of the felt ones (1st pic). The plastic liners are partly anchored by 2 clips that are fitted over the felt and plastic liner (pic 2). Now they definitely did some trimming to get them to fit, seen in pics 3 and 4. So it looks like those we referenced above may be the same and have to be trimmed to fit, or I'm assuming so since these were factory installed.
-
2
-
1
-
-
2 hours ago, CheeseheadFord said:
Yup May 2nd week here and no updates to speak of. I had not been discouraged until now. Made the mistake of selling my truck last week as I had assumed since I was scheduled for 5/2 it would happen, as that seems to have been the case recently. Unfortunately that doesn't seem in the cards now. Also sounds like we may be back to supply chain type issues again. I was hoping to have my truck by Memorial Day, I don't see that happening and am slightly panicking I won't have it by the first of July, which is when we have our large family vacation camping trip.....
Maybe we'll both catch some good news this week and see them before July vacation.
-
Fingers crossed this is the week I receive the coveted built status. Had a production week of May 2 that I was fortunate enough to never get bumped from. Unfortunately after eagerly anticipating the built email all last week it never showed. Thankful that I have made it this far in the process especially without ever going crazy searching for updates. With that light at the end of the tunnel and vacation getting closer the obsession is starting to set in. Anyone else with a production week of May 2 playing the waiting game too?
-
1
-
-
6 hours ago, FirstFord22 said:
@Gharri30 that’s what I like to hear, keep spending ? on her. Just don’t tell momma, surprise her, she’ll love it I’m sure ?
Surprised her with that early Mothers Day bed cover. Those late Morhers Day vent visors will be here tomorrow. ?
-
1
-
2
-
-
4 hours ago, Lee2021 said:
Understand completely! Also trying to figure out how I can get some non-towing miles in, however, with our current trailer at 7k lbs won't be stressing the truck much!
Has anyone posted the weigh safe drop hitch yet? I have the 3" shank, 6" drop, aluminum hitch sitting in our garage just waiting for the truck. It's max weight capability is 21k lbs, so I'll be able to tow any dump trailer, boat, travel trailer, skid steer, etc. They have sales every couple of months to get 15% off. Picked over B&W as I like the locking pins, the way that the balls are mounted, is quite a bit lighter than the steel ones, and just looks nice. Now its time for a garage sale for all of the 2" non-adjustable stingers and balls sitting in the garage!
This won't replace the WDH for the long term travel trailer towing, but it can handle just about everything else!
I've seen a few guys around my area with weigh safe hitches but have never got around to asking them about performance. I like that the B&W has the stow feature especially having a 3 year old running around. The weigh safe may have something as well I just haven't done my research on either yet.
-
8 hours ago, Lee2021 said:
It probably depends on your location. Mine was built earlier this week and has an estimated arrival June 2-8 in eastern Washington State. It just got on the train car is is heading to Gibson, IN this weekend.
Yea if I would have received a built and a built and shipped email this week for the beginning of June I wouldn't be as concerned. Hoping next week. Will have a lot to squeeze it before first week in July to have it ready for vacation. In the mean time I guess I'll continue buying stuff everyone posts..?
-
1
-
-
2 hours ago, 4thTimer said:
And I'm sure it doesn't have to be from Fairway. You can probably get them at a local dealer and maybe use FordPass points.
You're right. That was just the best price I had found it my little time searching. I bought my Tremor valance from them so I know they're good to go as well.
-
1
-
-
1 hour ago, 4thTimer said:
I guess I would call them. Perhaps they didn't add the 22 to their system. I don't have a truck yet. The ebay ad says something about a 3 year warranty. Maybe order a set and see. Perhaps some small cut or something would make them fit but if it's a bigger problem, return them.
There must be something for a 22 because it's an option. Surprised Rough Country or someone doesn't have an option yet.
Yea that was my thinking, that the info just hasn't been updated yet being that they were an option for the 22 builds. I'll probably grab a set when I get a delivery date for my truck. If they don't work I'm sure I can unload them to someone with a 21.
-
1
-
-
32 minutes ago, FirstFord22 said:
Plenty of time! She’ll be in your driveway before the end of the month ready for her maiden voyage!
You have the bed cover, wheels and tires aaaaand…
Everything is coming together
Glad you're optimistic. Saw someone's that got built earlier this week had a beginning of June delivery date. Bed cover, wheels/tires, lift, vent visors, waiting on grill/fender badges/mirror caps and rear seat cover. Still have few other things I want to have right away. The rest can wait...maybe.
-
17 hours ago, 4thTimer said:
I found it from Fairway on eBay.
I would think there would be a lot of people looking for these. My truck comes with the rears but the option to get all 4 was $330 which didn't make sense so I left it off. $330 is a fair price for all 4 but not when you're getting 2 of them free.
I saw those and messaged them on Ebay. They told me they would fit the 22s. Also I saw them on their website and they were listed for $144.90, its also where when plugg in it says they dont fit. It's shown in one of the pics above.
21 minutes ago, IUEC135ELEVATOR said:Did these go over the The fiber is feeling once that come on the truck or do they replace the fiber ones. I'm calling it fiber because it's almost like a molded cloth type material I'm not sure if all trucks come like this but my 19 and my 22 both have the same thing.
I would assume over but that's just speculation. I'll have to do some research and see.
-
13 hours ago, FirstFord22 said:
Went into production at the beginning of the week. Was hoping to have a built email by now but no such luck. My chances of having it and getting it ready for the beach trip in July are dwindling. My bed cover did show up today so there's that.
-
51 minutes ago, tcritch3 said:
Got the tint done today! Just need to put on my diamondback tonneau and it will be the last of the accessories for now! Smoked cab lights were installed yesterday.
That red is ?. Hoping to catch a built email this week. Tint is the first place mine is headed when it arrives.
-
1
-
-
37 minutes ago, WillSD said:
Per our parts catalog (Microcat Live): front HC3Z-16F099-A & rear LC3Z-9927886-A. Nice of Ford to create different basic numbers for the similar products. The callout for the fronts is actually 16102.
Those were the two numbers I kept finding. I could confirm that LC3Z-9927886-A was for the rears but when I would plug in HC3Z-16F099-A for the 2022s it would tell me it didn't fit. Hated to order and it not work.
-
1 hour ago, 4thTimer said:
That looks like a rear. Following
I noticed that too when looking at the picture but when you search the part number is comes up as the front as in the first picture below. The rears are shown in the second picture.
-
I have a 22 F250 on the way. After seeing one with the front wheel well liners I want to add them to mine when it gets here, already have the rears. The only number I have been able to find is HC3Z-16F099-A. When I plug it in it says it doesn't fit the 2022. I wouldn't think there would be a difference from the 17-21 to the 22. Can anyone that has them on their 22 confirm the part number for me? Thanks.
-
WS available, one step closer ?
-
2
-
-
3 hours ago, CBears said:
Tiger tough by Linex. Love mine.
Those look like they have a pretty good fit. I'll check them out. Thanks.
Super Duty Accessories
in F-Series SuperDuty Forum
Posted
I've seen the letters laid in on the hood before but always wondered what the tailgate would look like being raised already. Nice work.