mirak Posted July 8, 2009 Share Posted July 8, 2009 I'd like to swap out the visors in my new FFH for homelink-equipped visors. I see many listed on eBay for around $50, but I need a set that's (a) compatible with the car, and (B) matches the ceiling color. Do the 2010 Fusions have different-colored ceilings based on upholstery color? If so, anybody know the color code for the ceiling of a 2010 FFH with medium stone leather interior? Anybody added homelink visors? Any recommendations of matching cars? Quote Link to comment Share on other sites More sharing options...
delz05 Posted July 9, 2009 Share Posted July 9, 2009 I installed Lincoln homelink visors in my wife's 08 Fusion. I believe they were from a Zephyr or an LS. Less than half the cost for the ones listed for the Fusion/Milan. Bolt right up, same plugs. Quote Link to comment Share on other sites More sharing options...
svtenthusiast Posted July 9, 2009 Share Posted July 9, 2009 I looked into this for my 2010 Sport. I am not sure what it would take to modify the existing visors. I had Ford parts price a homelink visor for a 2010 MKZ and it was too much around $400. The thing you have to watch looking at previous years is the 2010 has the newer type of cloth on the visors and roof. Quote Link to comment Share on other sites More sharing options...
mirak Posted July 9, 2009 Author Share Posted July 9, 2009 I suspect it's going to be really tough, if not impossible, to find homelink visors which actually match the ceiling fabric of the 2010 FFH. But if I can get something close, nobody will probably ever notice. My dealership's parts & service center may be able to help get me some color codes and close matches, though I definitely won't be buying a new set of visors from them! If I cannot find something suitable on eBay for 50 bucks or so, I'll just suck it up and tuck a little transmitter somewhere. Quote Link to comment Share on other sites More sharing options...
pcsgrp35se Posted August 13, 2009 Share Posted August 13, 2009 I went to home depot and picked up a two switch works with anything remote and it solved my problem with different sears openers. Seems sears doesn't make a remote that works with both the older and newer openers you get stuck using two Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.