corvairdoug Posted February 8, 2021 Share Posted February 8, 2021 2000 Zetec DOHC, car sat a LONG time, started it, alternator seized up, belt got hot, kinda melted tensioner pulley. Ran fine, but squealed like mad. On shut off, I could hear some "sizzling" & "popping", in the area of the alternator. I replaced the tensioner and the alternator, (Rockauto), and in doing so, had to move the engine up down and forward quite a bit to get the alt and tensioner out of there. I only undid 4 plugs up by the firewall on the passenger side, and re-plugged all of it in. The battery is about dead, so I used a jump box to start the car today. It starts right up, but won't stay running; it won't idle. If I sit there with my foot in it, about 1/4 way down, it will run. If I let off the gas, it becomes really rough and lopes a lot, then dies quickly. I'm at a loss, no idea where to look next. I checked all the connections, nothing loose, etc. UPDATE: I put a different battery in that is fully charged. Connected positive, & turned key to "on" to clear codes. Started car, still won't idle. I had my wife start it and give it a little gas to keep it running; voltage at battery was 13.5-14.5, depending on rpm's. When she let off the gas, it stumbles all over itself misfiring etc, and slows down before dying. HELP! Lol, I don't know where or what should be next. Anybody got a clue? Thanks Quote Link to comment Share on other sites More sharing options...
rethorn Posted September 6, 2021 Share Posted September 6, 2021 Could be a bad IAC or a vacuum leak. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.