Dave-S Posted October 14, 2014 Share Posted October 14, 2014 I am a repeat Weathertech customer having installed the front and rear floorliners on my last car. I was completely satisfied with those mats but after installing my recently purchased floor liners in the Fusion I am disappointed at the fit of the front units. There are large gaps around the rear edge of both liners. I tried reshaping them with a heat gun and got a near perfect fit but they will not hold this shape. After a day or so they are back to their original shape. In contacting the company they say they fit is OK based on the pictures I sent but would be happy to refund my money. Before I return them I thought I would ask if anyone else bought the floor liners and had a problem with the fit. Dave Quote Link to comment Share on other sites More sharing options...
DrumReaper Posted October 16, 2014 Share Posted October 16, 2014 (edited) Yes, the rear portion of mine on the front liners, especially the passenger side, have a gap. I thought it was a worse fit than those in my F150, but tthefront of the seats conceal the gap so I didn't bother. Edited October 16, 2014 by DrumReaper Quote Link to comment Share on other sites More sharing options...
cjh Posted October 20, 2014 Share Posted October 20, 2014 Yeah there's a decent gap there. I find that its not an issue though and snowy feet don't get placed there. What I do find to be an issue is how short the mats are. Salt/slush gets under the mat because the tops don't go up quite high enough. Quote Link to comment Share on other sites More sharing options...
Dave-S Posted October 20, 2014 Author Share Posted October 20, 2014 Yeah there's a decent gap there. I find that its not an issue though and snowy feet don't get placed there. What I do find to be an issue is how short the mats are. Salt/slush gets under the mat because the tops don't go up quite high enough. That seems to be a bigger problem with the passenger side than the driver side but both sides could have been done better IMHO. Quote Link to comment Share on other sites More sharing options...
DrumReaper Posted October 21, 2014 Share Posted October 21, 2014 Another issue I am encountering is the lack of decent gluing of the logo.I have noticed them falling off in multiple mats. Quote Link to comment Share on other sites More sharing options...
cjh Posted October 23, 2014 Share Posted October 23, 2014 Another issue I am encountering is the lack of decent gluing of the logo.I have noticed them falling off in multiple mats. That's why you get different logos for them. http://www.diodedynamics.com/store/acrylic/ford/mustang/weathertech-replacement-badges-pair Quote Link to comment Share on other sites More sharing options...
jmdalton15 Posted October 24, 2014 Share Posted October 24, 2014 Does anyone know if the 2014 and 2015 have the same floorpan shape? I was looking at getting a set for the front and rear of my wife's 2015 FFH. I looked them up on the website and it says they have them for 2015 but I wanted to be sure they fit since there isn't that many 2015s out yet much less with weather tech mats. Quote Link to comment Share on other sites More sharing options...
coopny Posted October 29, 2014 Share Posted October 29, 2014 That's why you get different logos for them. http://www.diodedynamics.com/store/acrylic/ford/mustang/weathertech-replacement-badges-pair Do those logos only fit in the 1st row floor mats, or do they fit in the Weathertech Cargo Liner as well? Just curious if I should order just one pair or two. Quote Link to comment Share on other sites More sharing options...
cjh Posted October 30, 2014 Share Posted October 30, 2014 (edited) Do those logos only fit in the 1st row floor mats, or do they fit in the Weathertech Cargo Liner as well? Just curious if I should order just one pair or two. I don't have the cargo liner, but I believe they're all the same size (had a cargo liner in my last car). Edited October 30, 2014 by cjh Quote Link to comment Share on other sites More sharing options...
DrumReaper Posted October 30, 2014 Share Posted October 30, 2014 That's why you get different logos for them. http://www.diodedynamics.com/store/acrylic/ford/mustang/weathertech-replacement-badges-pair Dagum sweet brother. Thanks.. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.