Sox3

Been trying to get rid of that myself for the same reason. The sticker should be with your trailer backup assist paperwork. I had about 6 in the packet.

Moved my Viair 450c compressor from the old ride along with the 4 gal air tank and horns. Plenty of air for horns, have used it to air tires and run nailer on a couple projects. Tank mounted on passenger side between can and rear wheel, horns on drivers side. Compressor mounted in bed, front right side and air chuck in bed on right rear. Protected from the weather with bed cover.

Look up "jimmi jammer" in door Lock protection. That may be what your looking for.

Just traded my 2012 F250 larait ultimate ccsb to my dealer. I went online to Carmax for a price to buy it. They offered 33,400 for it and offer good for 7 days. Showed the dealer of there offer. Dealer gave me 34,000 for it. Truck had 99,000 miles on it, some rust in the bed cross rails. I was happy with the price. Go online and see what offers you get.

No, they changed the locks so cover locks to rails not tailgate. Tailgate can be opened with cover closed and locked

This is the MXT series, latches in 3 positions. I think the A series has multiple locking positions.

Installed Roll n Lock bed cover. Had one on our last truck, 10yrs with no issues. Also spray in bed liner by Rhino Liners.

Fedex showed up today with the bed cover. Cancelled thefactory one as it was a hold up item. We went with Roll n Lock again. Had one on the last truck, 10 years, no issues. Took about 2 hours to install. New cover d I es not lock to tailgate like the old one. I like that new feature.

Wife and I were able to see the Antimatter Blue in person prior to our ordering. In the sun it really pops with the two tone. Very happy with the choice.

Hang in there, mine was ordered July 21st. Just picked it up March 7th. Long wait but I have to say it was worth the wait.

This was prices as of 3/10 here in DE.

Changed outthe from air dam today, installed the 2WD one. Much better looking. Then added the front inner fender lower covers.

I just ordered a Roll n Lock. My last truck had one, 10yr and no issues. I did look at retrax But asked them how to clear the drain hoses if debris clog them. Was told you have to unbolt the unit to slide the whole thing back to clean them. The Roll n Lock you just open the roll cover and you can access them.

Mine was estimated 3/1 to 3/7. Shipped 2/19 to , Arrived at rail yard on 2/25, Jessup, MD, Arrived at dealer 3/7, Rising Sun, MD

Thank you, We had added the chrome package after we ordered. I put both builds up on the Ford site with the 360 view. Wife and I decided to add it after looking at both. Had also heard the front bumpers get paint chips. Last truck had chrome package and bumper held up well. I liked the painted wheels though.

Picked it up last night. Long long wait but worth it I'm my opinion.

Replacd our 2012 F250 Larait Ultimate tonite with 2022 F250 King Ranch Ultimate.

Well our wait is over. Picked up our F250 KRU tonite. Will post up some pics tomorrow. Wife took this at dealer. Ordered 7/21/21, Antimatter Blue, chrome package and other goodies. Well worth the wait.

7 is the new lucky number, Grandsons birthday today. Just got the call from my dealer. The truck has landed and getting cleaned up. Will pick up later today.

In Delaware, 250 KR, ultimate package, chrome package, 6.7,

The wait is finally coming to an end Ordered 7/21/21 Dropped Tonneau and spray In liner 12/1/21 Scheduled for build 12/16/21 for week of 2/8/22 Build Moved to week of 2/14/22 Dealer said build day 2/16/22 Built 2/18/22 Shipped 2/19/22 Arrived at Rail yard 2/25/22 Just got E MAIL from Ford., Truck has been built !! 2/19/22 @ 8:13 pm Estimated delivery to dealer 3/1/22 to 3/7/22 Update: 3/1/22 Dealer just e mailed me that the truck arrived at rail yard on 2/25/22. waiting on truck to make the final journey to dealer. Should be this week.

Front wheel well liner extensions Spray in bed liner Weathertech floor mats Roll n lock cover Led lights for running boards Lettering for tailgate Lettering for front 2 WD Front valance

The wait is finally coming to an end Ordered 7/21/21 Dropped Tonneau and spray In liner 12/1/21 Scheduled for build 12/16/21 for week of 2/8/22 Build Moved to week of 2/14/22 Dealer said build day 2/16/22 Just got E MAIL from Ford., Truck has been built !! 2/19/22 @ 8:13 pm Estimated delivery to dealer 3/3/22 to 3/9/22

My son in law put the Tremor valance on his. Direct swap with no issues except for removing the prius catchers from the frame ends.