ohsown

Squash factor, well I've been schooled! Am I ever glad I didn't know about this when I was looking for winter tires. I'd still be looking. I would have liked a narrower tire for winter as well but even the ones I bought show as not fitting my vehicle. Phone calls to Bridgestone were of no help either.

You may have the same tire, a Blizzak DM-V2, but, you do not have the same size. You show you have a 70 series, 255/70/18 where I have a 255/65/18. Your size has a 1.07" larger diameter, requiring only 649 revolutions per mile. This will change you speedo slightly, 23 tire revolutions over a mile shouldn't be that big but I dont know the math for how much. It will show you going a bit slower than you actually are. As for the forscan system, computer and drive system I don't know impact on them.

Tire size was a great frustration when picking winter tires for my 22 Explorer Limited (20" rims) when I decided to switch to 18" rims like on the XLT. I went with Blizzak DMV2's. On line sites would show they would not fit. Costco would not warranty or install them. When compared to the 20" DMV's there is negligible difference. The 18" diameter, (P255 65 18) is 31.06" with 671 rotations per mile v/s the 20" (P255 55 20) 31.02" with 672 rotations per mile. When these numbers are close how could there be a problem. Of course load and speed ratings need to be close as well. The dealer I purchased my Explorer from ordered and installed the DMV's for me on some aftermarket wheels I supplied. There was never any concern over fit or computer recalibration. If there is a larger difference in the numbers for revolutions per mile it could make small difference in your speedometer reading but just a few mph. Hope this helps clear it up some for you.

Last week my dealer called to set up a service date as the washer reservoir with internal pumps had arrived, yesterday was the day, 8 a.m.. A free loaner was provided as per usual. I heard back from them after lunch with the news I've been waiting for, namely, having finished the installation, the spray activated as soon as the control was pushed. Letting it sit over the noon hour proved to have the same result with no apparent loss of prime to front or rear washer spray. I tried it again this morning after it sat for 17 hours and had the same instant spray operation. It took some convincing to sway them from their initial "thats normal" mindset along with supply chain delays but finally job done, hopefully with no further issues or goosebumps from a wiper scraped across road grime on dry glass.

Just about 6 wks gone since last trip to dealer. My Explorer has sat for the last week due to my being laid up. Taking it out first drive since (raining) I found the spray function for the windshield took 4 or 5 seconds before spraying. Jogging my curiosity I called and found that a rear washer pump has been ordered but no eta. I told him about the front and he confirmed something I had read about on older models prior to the 2020 refresh, but I found nothing about on models sincebeing there are 2 washer motors in the reservoir, the rear sitting higher. So if you notice a lack of spray for the rear check the fluid level. I had already ruled this out months ago. Something new is the part number is different now so something has changed. A stroke of luck, the 2 pumps and reservoir are available as a complete unit so this is now on order with no eta available and its up to the wizardry of the supply chain overseers.

I'm in Ontario as well and used the Ford vehicle order tracking site as posted in the Explorer forum. I found the info pretty accurate and within a week (early) of actual delivery by truck from Chicago to Dutton. Try your luck. https://www.ford.com/support/how-tos/search/track my vehicle order/

What motor is in your 22 Explorer?

Very nice. I drove my brothers Edge with the 2.0 and it was pretty peppy. I now use Eco mode in my 22 Explorer with the 2.3 around town or highway cruising. The need for speed seems to be waning and traffic to heavy for me to be another one of the maroons people shake heads over. I'm not sure I want to make a move so soon after getting this one. Maybe some Ford incentives will get me there! Congrats and enjoy yours!

I just purchased a 22 Explorer I got in Nov. A good deal and not a bad vehicle but bigger than I really need. I still like the Nautilus. The 2.7 is a $4,000.00 leap in Canada, plus requires the 201A option which is another $3600.00. As much as I would like it, its a Stupid, Stupid, Stupid amount to get a 2.7. Mind you the 201A does include most bells and whistles but that puts the build at about $68,000.00 Cdn. I have put off a Nautilus for 6 or 7 years now maybe the 2.0 is livable, so is the Edge but wont scratch the itch.

Would that be a 2022 or are you still thinking of waiting for a 23 ?

Yesterday, Apr. 18, 4th trip to dealership for spray delay problem to install new spray nozzle for the rear camera washer. The thinking being this may be a similar situation to the front camera washer that was a problem on ford pickups due to leaking washer fluid from the nozzle. This attempt failed to remedy the delay problem with fluid draining back out of the line. Again on washer activation air is forced out of the hatch window washer nozzel while the wiper is passing dry across the glass before fluid starts to spurt from the nozzel then finally spraying. Again, from a different service rep. I was told this is normal operation. The dealership owner and I checked a new Aviator he has on the lot ( no Explorers available ) that had not moved in over a week and again confirmed it is not normal as the washer sprayed as the wiper started to move. We have done this check together on a new Explorer prior to this with the same instant spray result. He is going to contact Ford through some messaging process they have for tech sssistance ( the name eluded him ) for their guidance as to a solution. The upside, when I asked him the trade in value his reply was that it was probably more than I paid but I'm not there yet!

Well replacing the rear window sprayer nozzle made to improvement to the operation. Their service tech said that there was a problem a while ago with the F 150's front camera washer for which a tsb was issued, that perhaps the rear camera washer on my explorer might have a similar problem. Parts on order. I told him we will give this a shot but next step will be replacing lines from pump back. Time will tell.

Its done, both parties have agreed to binding arbitration. This is most likely the final outcome if things had progressed as they were. Nice to see cooler heads prevail.

Give them 8 to 10 days for some semblance of negotiations before being legislated back to work. Even Trudy has to appear to allow for the bargaining process. This is what happened to us even in the days of wage and price controls.

Took my Explorer back to the dealer again for the sprayer issue. The first time they told me not spraying when the wiper starts is normal. They maintain there is no check valve in the nozzle. Gave me a loaner for the day, gratis. Took it apart and they tell me the hose doesn't seem to kinked and connection is fine. They will now order a new nozzle and try that. I have no idea what the nozzle might cost but do know round trip with my vehicle and another with the loaner runs about 25 canadian pesos, not to mention 2 hours on the road. The saga continues.

Thanks for this, I havent been able to get any info on it. I did speak to the dealer last week but havent heard back yet.

The rear washer on my 22 explorer has glitch that makes me cringe every time I use it. When I push the stalk to activate the washer/wiper, the spray function doesn't start until after the wiper has made at least 1 1/2 passes. I thought maybe the fluid was draing back between uses but trying it as little as 2 minutes later has the same result. Is there a checkvalve involved? Are others having a similar experience? I've found reports of other makes ( BMW, Audi ) but nothing on Explorers or other Fords.

Picked up the new ride Nov. 26, so just over a week of driving and settling in. A big technology change from 2014 when we bought our last one and that is a learning curve. Some of this I will never use. Burnt some gas idling in the driveway figuring it out but I know some refreshers will be required by the time I need the cruise control and the adaptive part I have a brake and gas pedal that has always worked for me. Only a half tank of gas used at this point and only one minor irritation, being the rear window washer, when activated the blade makes a pass before the washer fluid hits the glass. Not the best on mud sprayed glass. Thats all which is amazing all things considered. Pretty happy so far.

My wife and myself thought the same about the step in especially coming from a low slung sedan. Lowering the seat hight (if equipped) can help but after a week of driving, it isn't as noticeable. The sedan took some getting used to when we first bought it as it was a little harder getting out of it compared to our Venza.

Lol ! Yes, I had a 1976 for a winter beater. Always liked the style of most "LTD's" , nice interiors too.

I dont know yhe actual date shipped as the order tracker shows no ship date. But the built date of Nov. 14 (which then showed a 26th delivery) Then arrived on the 19th on the same truck as his. I believe it showed shipped on 15 or 16. Also by truck from Chicago to our dealer is less than 8 hours. Their suggested delivery dates allow lots of room for unknown delays. Also their delivery date may mean from the dealer to customer after dealer prep. I bet your vehicle will be in PA long before what they show. My friend took the 10 minute drive to the dealer and saw ours and and also a black LTD on the lot. Did his inspection ( they were perfect) and snapped some photos to send me

Further investigation shows both vehicles delivered to dealer Friday Nov. 19. Being a small town dealership service only is open today, Sat. Until noon. Looks like a short drive monday to drop off my new wheels to get the snows mounted and installed prior to pickup. 2 months from order to drop at dealership in the midst of all thats going on is pretty impressive!

Our dealer notified me on Oct. 29th the order ( Canadian ) I placed with him the morning of Sept. 20, priority # 16 is confirmed and VIN supplied, scheduled for Nov. 8 build with an eta at his dealership Nov. 22. Now my buddy that got me x plan pricing ordered exact same vehicle, Rapid red ltd. Tow pkg. Start stop delete but sandstone interior to my black, ordered his that same day but in the afternoon priority 17. Confirmed order VIN issued same build date Nov. 8 but is eta'd at the dealership a week earlier on Nov. 15. It will be interesting to see how things unfold. This is from my thread in the explorer forum. The Ford vehicle order tracker is pretty close to the timeline. Order number and vin from dealer required and easily supplied. ETA is now Nov. 26 . It is now built awaiting shipment ( an 8 hour run or less from Chicago ). Good luck from London.

Ford order tracker shows mine built Nov. 14, awaiting shipment. Expected delivery Nov. 26 and my buddies is Nov. 24. I told him I was pretty sure they would hold the carrier for me. Less than an 8 hour run away now. Winter tires and wheels waiting. I tell ya I'm going to miss the Lexus GS !

Well my buddy e-mailed to let me know his explorer that window stickered Nov. 2nd, showed on Ford Vehicle order tracking as being built this past Friday Nov.12. I think that's pretty respectable. Mine, stickered Nov. 3rd, not yet. So will this be a blue Monday or will Ford turn a frown upside down. Now as mentioned in first couple of posts, above the dealer originally said his was supposed to be delivered to dealer Nov. 15 and mine Nov. 22. I'm not sure if that means "the week of" or not.