buckstop515

Refund, I have been buying x plan for years and the x plan price has always reduced the sale price at time of sale. Even on orders.

My 22 250 is the same way. I keep meaning to push it in but forget about doing it.

Your dealer can check to see if you or family member have one. There may be one your not aware of.

I used hybred solutions ceramic coat within days of getting my truck. The finish is as good as Ive ever seen. There is also a hybred solutions ceramic detailer. Both are easy to use. I applied a 2nd coat after 6 months but it didnt really need it. The finish feels as soft as a mink coat.

I have the b&w turn over hitch and the b&w companion non slider 5th wheel. These are installed on my 22 f250. My truck is the 6.75 box and Im pulling a 22 jayco eagle ht trailer. I have experienced no issues backing into tight camping spots. I see no reason for a slider at least in my case.

Marathon seat covers. These are the best fitting covers I have seen. Very tight no wrinkles. Easy install. They will send color swatches to match your interior. Carhart isnt even close in quality. 2022 f250 xlt

I had a similar issue after I plugged into the bed mounted plug. What I found was a loose connection on the wiring harness where the y was plugged into the truck harness causing intermittent weak connection. I never lost complete connection but an extended brake application threw a right rear trailer brake light fault. I took all the connections apart applied connection grease and my problems disappeared. The loose connection was directly behind the spare. I had to lower the spare.

I have the factory back mat which covers up to the storage.throw a carpet runner of the correct size over the rubber mat. I have a couple of dog beds thrown in also. I made a bag out of boat top material to cover the seat back over the top of my seat covers. I also put side covers on the back doors to protect the window ledge. All of this can be removed when you arent hauling the pups taking the stink out of the truck.

I have a 22 f250 crew 7.3 w/4.30 gear. Driving around unloaded I vary 11 to 15mpg. Pulling the 5th wheel 8.5mpg. Before I loaded the trailer I was getting 10mpg. I live in the ozarks so my driving is hills and curves not conducive to good mileage.

Mine was built 11/20 2021. I just talked to my dealer today, no recall as of yet.

I have one of those. No I didnt use the chair as a step. Just a cheap walmart thing. The platform is nice but I still have to use a ladder to reach the roof and Im 6'.

Mine was built Nov. 20, 2021 and mine does not have a recall. My software was just updated through ford pass though.

Do yourself a favor and just remove the grill and passenger headlight. In the long run it saves time. The lower bolt on the headlight is a 13mm. Also run your wiring in front of the radiator and into the sideby your air box. The instructions are pretty poor.

I just installed the Raptor Style grill lights from custom auto works on my 22 xlt 250 Pretty straight forward install. I did remove my grill and passenger side head light to make the install easier. I plugged in the wiring harness to the parking light which besides running with heads on also lights up the front when leaving the vehicle until it times out. Great product at a reasonable price.

I installed the curt front reciever. The job took about 45 min. Working alone. No drilling it bolts right up. I do have the tremor valance and prius catchers are removed

Get factory then add the factory filler for the bumper gap.

I even asked for a copy of the order. They sent me a order review form not the actual order. The only reason I ever knew that the truck had been ordered was I found the dealer order code and some other detail that allowed me to find the truck in fords system. As it turned out the seating was not what I wanted. I wanted the console And they ordered the 40/20/40 bench. Glad I got the truck I wanted.

My tt tongue sits level at 19.5" to the top of the socket. My 22 f250 cc 10.000 lb. With 2" drop set at about 25" to top of ball. I ordered a 6" Curt drop shank for my curt weight distribution head. I havent installed it yet, but from looking it will be perfect. I also added timbren bumper stops to reduce any squat if there is any.

Springfield, mo.

I ordered a truck from a corwin owned dealership. After 3 weeks and numerous calls to confirm my order, and no contact from ford, I went to another dealer and ordered. I recieved a nearly instant response from ford and the next day a vin and production date. I do know corwin got the first order in, 1 day before my 2nd order. My second order took 58 days from order to delivery. I think corwin was happy I didnt take the truck. Im a x plan buyer so their profit margin jumped tremendously.

I doubt you could ever notice the mileage difference. Just differences in driving habits or routes, or idle time will make more of a difference.

Those are the prius catchers and not needed. They hang lower than the valance and look out of place. I put on a front receiver and had to remove them to bolt it on, as it used those holes.

Rapid Red is a nice color. However I just as soon not have the favorite choice of everybody else. It would be like owning a white suv.

Back when the order spread sheet was working the 2 colors most chosed were rapid red and anti matter. Race red was the least chosen. I had a stone gray and it was the easiest color to keep clean I ever owned.