silvrsvt Posted March 12, 2020 Share Posted March 12, 2020 Looking at the engine compartment, its based on the C2-looks similar to the 2020 Escape and nothing like the current CD4 Edge https://indianautosblog.com/2021-ford-endeavour-2021-ford-everest-spied-interior-suspension-revealed-p320002 Quote Link to comment Share on other sites More sharing options...
jcartwright99 Posted March 12, 2020 Share Posted March 12, 2020 (edited) My money is on an Edge testing mule. Edited March 12, 2020 by jcartwright99 Quote Link to comment Share on other sites More sharing options...
akirby Posted March 12, 2020 Share Posted March 12, 2020 1 minute ago, jcartwright99 said: My money is on an Edge testing mule. Yep. Looks like a 3 row based on the rear overhang. Not a very inspiring side profile though - I hope that's not the final styling. Quote Link to comment Share on other sites More sharing options...
Trailhiker Posted March 12, 2020 Share Posted March 12, 2020 It is a big improvement over the current Edge grill. Quote Link to comment Share on other sites More sharing options...
silvrsvt Posted March 12, 2020 Author Share Posted March 12, 2020 8 minutes ago, akirby said: Yep. Looks like a 3 row based on the rear overhang. Not a very inspiring side profile though - I hope that's not the final styling. A certain member here (no not that one LOL) said it looks alot like the 2020 Escape... Quote Link to comment Share on other sites More sharing options...
jcartwright99 Posted March 12, 2020 Share Posted March 12, 2020 Can the C2 hold the 2.7? Quote Link to comment Share on other sites More sharing options...
akirby Posted March 12, 2020 Share Posted March 12, 2020 1 minute ago, silvrsvt said: A certain member here (no not that one LOL) said it looks alot like the 2020 Escape... Spitting image.......NOT! Quote Link to comment Share on other sites More sharing options...
silvrsvt Posted March 12, 2020 Author Share Posted March 12, 2020 5 minutes ago, akirby said: Spitting image.......NOT! Hard to tell with 3/4 of it covered with camo I don't have x ray vision like that other guy. Plus I wonder what is going on with the tailgate-it looks like its missing a piece with the tail lights floating out there. Quote Link to comment Share on other sites More sharing options...
akirby Posted March 12, 2020 Share Posted March 12, 2020 Just now, jcartwright99 said: Can the C2 hold the 2.7? The larger CD version should be able to handle the 2.7L just like CD4. I personally don't think they'll go larger than that and will keep the 3.0L longitudinal only. C2 Transverse 1.0, 1.5, 2.0, 2.3, 2.7 Longitudinal (CD6, trucks, vans, mustang) 2.3, 2.7, 3.3, 3.0 TDi, 5.0, 5.2, 5.2SC, 6.7, 7.3 2 Quote Link to comment Share on other sites More sharing options...
jcartwright99 Posted March 12, 2020 Share Posted March 12, 2020 I am going to assume there will be a decent amount of weight loss going to C2. The Edge is kinda husky now. 2 Quote Link to comment Share on other sites More sharing options...
rmc523 Posted March 12, 2020 Share Posted March 12, 2020 As I said in the other thread, please Ford, don't follow that hideous split headlight trend. Or keep it in China. Quote Link to comment Share on other sites More sharing options...
silvrsvt Posted March 12, 2020 Author Share Posted March 12, 2020 25 minutes ago, rmc523 said: As I said in the other thread, please Ford, don't follow that hideous split headlight trend. Or keep it in China. Going on what they are doing with the upcoming Ranger and F-150...that is already out of the barn. Even the Bronco is kinda doing it. Quote Link to comment Share on other sites More sharing options...
T-dubz Posted March 12, 2020 Share Posted March 12, 2020 If done right, the split lights can look pretty cool. Not many have done it right though so far lol. Quote Link to comment Share on other sites More sharing options...
rmc523 Posted March 12, 2020 Share Posted March 12, 2020 1 hour ago, silvrsvt said: Going on what they are doing with the upcoming Ranger and F-150...that is already out of the barn. Even the Bronco is kinda doing it. F-150 is nothing like this. Just because the running light runs down into the fog light? Bronco? how? I'm talking about the main headlight being down in the bumper corner with just a running light up top. Just an ugly look. Quote Link to comment Share on other sites More sharing options...
silvrsvt Posted March 12, 2020 Author Share Posted March 12, 2020 1 hour ago, rmc523 said: I'm talking about the main headlight being down in the bumper corner with just a running light up top. Just an ugly look. It doesn't look too terrible-its not like last gen Cherokee bad. It looks like they made the foglights slightly bigger, which are actually the headlights. Quote Link to comment Share on other sites More sharing options...
jpd80 Posted March 12, 2020 Share Posted March 12, 2020 8 hours ago, akirby said: The larger CD version should be able to handle the 2.7L just like CD4. I personally don't think they'll go larger than that and will keep the 3.0L longitudinal only. C2 Transverse 1.0, 1.5, 2.0, 2.3, 2.7 Longitudinal (CD6, trucks, vans, mustang) 2.3, 2.7, 3.3, 3.0 TDi, 5.0, 5.2, 5.2SC, 6.7, 7.3 The largest engine currently in C2 is the 2.3 EB so don’t be surprised if the V6 gets the heave ho. Quote Link to comment Share on other sites More sharing options...
spudz64 Posted March 12, 2020 Share Posted March 12, 2020 I saw this here and with interior pics, doubted it was the Everest... http://www.burlappcar.com/2020/03/2021-ford-everest.html Quote Link to comment Share on other sites More sharing options...
jpd80 Posted March 12, 2020 Share Posted March 12, 2020 Next gen Everest is not scheduled for ROW release until late CY 2022 Quote Link to comment Share on other sites More sharing options...
ausrutherford Posted March 13, 2020 Share Posted March 13, 2020 Not the Everest. That will remain being Ranger-based. This could be the CX758 (is that the right #?) for the 3rd row c-segment crossover being shared with the next gen Transit Connect and the small truck. 1 Quote Link to comment Share on other sites More sharing options...
bzcat Posted March 13, 2020 Share Posted March 13, 2020 7 hours ago, ausrutherford said: Not the Everest. That will remain being Ranger-based. This could be the CX758 (is that the right #?) for the 3rd row c-segment crossover being shared with the next gen Transit Connect and the small truck. Probably not CX758 but one of the two Edge replacements. China is getting its own 3-row CUV (which this appears to be). Europe is supposedly getting another smaller 3-row CUV. Quote Link to comment Share on other sites More sharing options...
fuzzymoomoo Posted March 13, 2020 Share Posted March 13, 2020 So even though whatever it is it's a cobbled together Mule, this looks completely different than what I saw and was told was NG Edge, so either what I saw was something else entirely (doubtful) or the design changed a LOT since Hackett took over. Quote Link to comment Share on other sites More sharing options...
passis Posted March 13, 2020 Share Posted March 13, 2020 The timing seems in tune with the test mules of P758. I am starting to think it could be CX758 (which, by the code number, should be a 7 seater, in agreement with these spyshots). If both share a lot of engineering it makes sense that they are out more or less at the same time. Quote Link to comment Share on other sites More sharing options...
edselford Posted March 13, 2020 Share Posted March 13, 2020 Looks like a three row Edge to me! No way this is a body on frame Everest design edselford Quote Link to comment Share on other sites More sharing options...
rmc523 Posted March 13, 2020 Share Posted March 13, 2020 7 hours ago, fuzzymoomoo said: So even though whatever it is it's a cobbled together Mule, this looks completely different than what I saw and was told was NG Edge, so either what I saw was something else entirely (doubtful) or the design changed a LOT since Hackett took over. Or this is just a Chinese-only model unrelated to the Edge you saw. Quote Link to comment Share on other sites More sharing options...
fuzzymoomoo Posted March 13, 2020 Share Posted March 13, 2020 18 minutes ago, rmc523 said: Or this is just a Chinese-only model unrelated to the Edge you saw. That could be too, I don't know. I don't talk to my source anymore so I don't keep up on those things like I used to. Probably for the best so I keep myself out of trouble. 2 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.