akirby Posted June 6, 2018 Share Posted June 6, 2018 I suppose it’s possible to do a hybrid on the existing platform but it doesn’t make much sense if cd6 is coming 2 years later. Quote Link to comment Share on other sites More sharing options...
rmc523 Posted June 6, 2018 Share Posted June 6, 2018 I suppose it’s possible to do a hybrid on the existing platform but it doesn’t make much sense if cd6 is coming 2 years later. Agreed - seems like it'd be a compromised product just to meet a deadline. Quote Link to comment Share on other sites More sharing options...
SoonerLS Posted June 6, 2018 Share Posted June 6, 2018 You can fit a car seat in the back seat for one. The trunk is actually useable for more than a backpack Car seats. Feh. Who needs car seats? Kids go in the bed with the dogs and tools. 2 Quote Link to comment Share on other sites More sharing options...
Twin Turbo Posted June 6, 2018 Author Share Posted June 6, 2018 The Challenger is also a 5-seater........but that 'aint what we're talking about A hybrid S550 would surely be a compromise......much better to "design it in" to the S650, even if it's delivered 2 years later. I just hope they don't let S550 soldier on for another 4 years without further updates. Quote Link to comment Share on other sites More sharing options...
Fordowner Posted June 6, 2018 Share Posted June 6, 2018 And Ford had little problem moving 2005 to 2014 Mustang, it was Gen 5 Camaro that made Ford do more with Mustang. Challenger is different, it's a larger more practical car with a different client base. Though the 2005 was a genius design and the refresh was pretty dramatic with an entirely new interior and front and end. I have a 2007 and my spouse has a 2014 - they seem very different. And the tail lights on the 2014 are one of my favorite tailights, an improvement over those short lived candy cane taillights after the 1st refresh. 2023 is a long time, then again they may have enough sales overseas to keep the plant busy through then. 1 Quote Link to comment Share on other sites More sharing options...
fuzzymoomoo Posted June 6, 2018 Share Posted June 6, 2018 2023 is a long time, then again they may have enough sales overseas to keep the plant busy through then. If nothing else, theres the gigantic backlog from RHD markets.... 2 Quote Link to comment Share on other sites More sharing options...
2b2 Posted June 6, 2018 Share Posted June 6, 2018 (edited) sidebar with all the talk about profit-margin-profitability[= more $$ for the 1%ers?] could the reason Ford has been sooo stingy with RotW-Stangs is cuz the shipping wipes out most-if-not-all profit? even with the RotW-pricing? & wondering if that can be fixed? ...if we ever need vehicles[cars] built elsewhere? Edited June 6, 2018 by 2b2 Quote Link to comment Share on other sites More sharing options...
jpd80 Posted June 6, 2018 Share Posted June 6, 2018 (edited) sidebar with all the talk about profit-margin-profitability[= more $$ for the 1%ers?] could the reason Ford has been sooo stingy with RotW-Stangs is cuz the shipping wipes out most-if-not-all profit? even with the RotW-pricing? & wondering if that can be fixed? ...if we ever need vehicles[cars] built elsewhere? Home room basically sells the Mustang to FOE/FOA at full price, all shipping and import costs go to end user. GT Premium LHD - CDN$49K when the delivered RHD version ends up AUS$65K (Aussie$ and Canadian $ are almost equal) We don't complain about the fact that the factory RHD Mustang is more expensive than the LHD, we're still miles ahead of the GM Guys and their post factory RHD conversions, they're way more expensive. Edited June 6, 2018 by jpd80 2 Quote Link to comment Share on other sites More sharing options...
2b2 Posted June 6, 2018 Share Posted June 6, 2018 TY^ what's "Home room"? Quote Link to comment Share on other sites More sharing options...
2016RS Posted June 6, 2018 Share Posted June 6, 2018 Possible Lincoln off the next Gen Mustang????? Quote Link to comment Share on other sites More sharing options...
jpd80 Posted June 6, 2018 Share Posted June 6, 2018 (edited) TY^ what's "Home room"? The region that designs/ manufactures the vehicles,They usually get to keep most of the profit on exports The RHD / Euro reg vehicles -those countries all pay for development costs of those models ? Edited June 6, 2018 by jpd80 1 Quote Link to comment Share on other sites More sharing options...
Assimilator Posted June 6, 2018 Share Posted June 6, 2018 (edited) Presumably Mustang is going to be on the CD6 Unibody RWD flexible architecture which Ford talked about in the "Uncovered" event, the first example of which is arriving as the 2020 Aviator/Explorer. This is actually a major step forward for Mustang, the first shared Mustang platform since the Fox Body. CD6 certainly gives Lincoln more tools to make a suitable exotic sports car which it never had with any of the previous Mustangs. The Mustang has long been a very locked down and highly specialized platform with no room for Lincoln to civilize. I don't think Lincoln really has the customers for a performance car, and their brand image as we know it today certainly would be at odds with a Mustang Lincoln. I still think we will see other opportunities open up for performance crossovers in both Hybrid and EV form that will give Lincoln something more exciting to play with than a posher Mustang. Lincoln has never been a performance brand, but it has always been a brand of confident performance, elegance, and technical amenities. Mustang works because it's a well sustained cultural institution, Lincoln would be appearing out of thin air with no reason to exist and the barrier to entry is gigantic for them. Lincoln has so many bigger fish to fry right now. Edited June 6, 2018 by Assimilator 1 Quote Link to comment Share on other sites More sharing options...
2b2 Posted June 6, 2018 Share Posted June 6, 2018 imho the only fish Lincoln has is the MKT & it needs composting, not frying & until it's gone [buried or China'ed], the whole operation stinks... ...also totally hides its potential 1 Quote Link to comment Share on other sites More sharing options...
Sevensecondsuv Posted June 7, 2018 Share Posted June 7, 2018 (edited) I think Lincoln could sell a performance model. If Hyundai and Kia can launch performance models successfully, there's no reason Lincoln couldn't. It's not like Lincolns are regarded as bad cars. The brand's image in buyers minds is they make nice cars, but they're not very exciting or youthful. Do a performance model right, and buyers would take notice of the positive press and embrace it as a car that combines Lincoln's upscale image with mustang performance DNA. Buyers would be a mix of traditional Lincoln customers (if you haven't noticed, not even 65 year old boomers want to be seen in a stodgy old man's car), people who want a mustang but aren't quite satisfied with the level of luxury offered by the Ford/Mustang brand, and true conquest sales of people who are just into the latest fast cars. No, it wouldn't take down BMW or Audi, but it would add a nice amount of incremental sales to Mustang platform/assembly line. Edited June 7, 2018 by Sevensecondsuv 2 Quote Link to comment Share on other sites More sharing options...
Bronco Buster Posted June 7, 2018 Share Posted June 7, 2018 Sevensecond, I like your thinking. Something like the XR-7 Cougar was to the Mustang of old. Quote Link to comment Share on other sites More sharing options...
MKX1960 Posted June 7, 2018 Share Posted June 7, 2018 I just hope they don't let S550 soldier on for another 4 years without further updates. You would think with Mustang being the only "sedan" left, they would give it more attention than in the past and not allow it to become stale. 2 Quote Link to comment Share on other sites More sharing options...
jasonj80 Posted June 7, 2018 Share Posted June 7, 2018 As of 4 months ago this was totally false, however the whole industry is freaking out with the tariffs and trying to figure out what to do with production so it could be true. MKZ replacement, Continental and Mustang were all going to be at FRAP, I could see the next Continental going to the CD6 plant in China for China only sales (I could even see Mustang production in China for local and better trade agreement countries). Manufactures are also leaning up for the coming recession so this could be slowing capital to weather that and come out on the other side with new product like Ford did with the last recession. Launch Volume product in the recession to take share and launch specialty products after when disposable income is higher and people are willing to show a little flash with their purchases. 1 Quote Link to comment Share on other sites More sharing options...
Moosetang Posted June 7, 2018 Share Posted June 7, 2018 You would think with Mustang being the only "sedan" left, they would give it more attention than in the past and not allow it to become stale. Part of this equation is going to come down to how the cars Mustang competes against react to the new market reality. If the other pony cars and imports that Mustang is battling scale back their refresh cycle to save money, Ford likely will take a somewhat similar route. On the other hand, it's possible some of them will crank up the refresh tempo in order to compete more effectively, in which case it will be interesting to see how aggressively Ford responds. Quote Link to comment Share on other sites More sharing options...
LSchicago Posted June 7, 2018 Share Posted June 7, 2018 I think Lincoln could sell a performance model. If Hyundai and Kia can launch performance models successfully, there's no reason Lincoln couldn't. It's not like Lincolns are regarded as bad cars. The brand's image in buyers minds is they make nice cars, but they're not very exciting or youthful. Do a performance model right, and buyers would take notice of the positive press and embrace it as a car that combines Lincoln's upscale image with mustang performance DNA. Buyers would be a mix of traditional Lincoln customers (if you haven't noticed, not even 65 year old boomers want to be seen in a stodgy old man's car), people who want a mustang but aren't quite satisfied with the level of luxury offered by the Ford/Mustang brand, and true conquest sales of people who are just into the latest fast cars. No, it wouldn't take down BMW or Audi, but it would add a nice amount of incremental sales to Mustang platform/assembly line. I've been waiting for such a car. The 3.0TT is nice, but not the answer. A Coyote powered Lincoln would be awesome! MK VII sold well because of the 5.0/Mustang connection, while being a Luxury car. Quote Link to comment Share on other sites More sharing options...
fuzzymoomoo Posted June 7, 2018 Share Posted June 7, 2018 As of 4 months ago this was totally false, however the whole industry is freaking out with the tariffs and trying to figure out what to do with production so it could be true. MKZ replacement, Continental and Mustang were all going to be at FRAP, I could see the next Continental going to the CD6 plant in China for China only sales (I could even see Mustang production in China for local and better trade agreement countries). Manufactures are also leaning up for the coming recession so this could be slowing capital to weather that and come out on the other side with new product like Ford did with the last recession. Launch Volume product in the recession to take share and launch specialty products after when disposable income is higher and people are willing to show a little flash with their purchases. I dont think Ford will ever split up Mustang production. I think they love the idea of it being built in one plant. It makes it more special that way. 1 Quote Link to comment Share on other sites More sharing options...
jasonj80 Posted June 7, 2018 Share Posted June 7, 2018 I dont think Ford will ever split up Mustang production. I think they love the idea of it being built in one plant. It makes it more special that way. Depends on the tariffs and sales potential, it is going to come down to dollars and cents. Where you do you sell most of them at and what is the cost of second production to avoid outside factor costs. I could see Chinese Mustang sales overtake those in the US by 2025. If China starts hitting 150K Mustang sales it makes more sense to build them there. At an average of $30,000 USD for can save $675 million per year in just tariffs/ model year. That makes the avg car at a $30,000 sticker $4500 cheaper AND have much lower transportation costs. So they can continue to charge the same with the tariff included and have massive more profit or lower the vehicle price and expand sales. I also could see if TC and such is going to FRAP that it gets moved to Chicago. Next years contract will say a lot about future product. Quote Link to comment Share on other sites More sharing options...
bzcat Posted June 7, 2018 Share Posted June 7, 2018 I dont think Ford will ever split up Mustang production. I think they love the idea of it being built in one plant. It makes it more special that way. Spiting the production will also do terrible things to plant utilization at Flat Rock, which actually will spell doom for Mustang production there. The worldwide market for sports coupe is not that big... I can't see how Ford will ever need more than one production site for Mustang. 2 Quote Link to comment Share on other sites More sharing options...
fuzzymoomoo Posted June 7, 2018 Share Posted June 7, 2018 Spiting the production will also do terrible things to plant utilization at Flat Rock, which actually will spell doom for Mustang production there. The worldwide market for sports coupe is not that big... I can't see how Ford will ever need more than one production site for Mustang. The same thing would happen at MAP if they decide to add Bronco production at a second plant elsewhere in the world. Quote Link to comment Share on other sites More sharing options...
2b2 Posted June 7, 2018 Share Posted June 7, 2018 (edited) cD6 has been presented as One-Fifth[?] of their future architectures there's gotta be more than Explorer/Aviator/Mustang on it OR it won't last very long Edited June 7, 2018 by 2b2 Quote Link to comment Share on other sites More sharing options...
rmc523 Posted June 7, 2018 Share Posted June 7, 2018 cD6 has been presented as One-Fifth[?] of their future architectures there's gotta be more than Explorer/Aviator/Mustang on it OR it won't last very long I don't see how it cant have Edge/Nautilus on it too, despite the talk that C2 can accommodate "up to Edge size vehicles." Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.